1) gauge resistance
应变计(片)电阻
2) resistance strain gauge
电阻应变计[片]
3) resistance strain gauge
电阻应变片
1.
The residual stress on the surface of the wrought tin brass HSn70-1 was measured by means of the resistance strain gauge.
用电阻应变片法测试了变形锡黄铜ＨＳｎ７０－１管材表面的残余应力，分析了拉拔管材变形参数对管材表面残余应力及其他性能指标的影响规律。
2.
A fruit firmness meter with resistance strain gauge was developed with the method of non-destrutive technique.
试制了一种无损检测的电阻应变片式水果坚实度计，并比较了苹果坚实度无损测量方法与普通有损测量方法的精度。
3.
The working principle of resistance strain gauge was introduced,the method of measuring the axial force of turbocharger rotor was put forward,and the measuring test of axial force for turbocharger rotor was carried out.
介绍了电阻应变片的工作原理,提出了应用电阻应变片来测量涡轮增压器轴向力的方法,并进行了某涡轮增压器的轴向力测量试验。
4) electric resistance strain gage
电阻应变片
1.
Beam samples are produced by low dosage cement stabilized aggregate and electric resistance strain gage is glued at its both sides.
将低剂量水稳碎石做成梁式试件,并在两侧粘以电阻应变片,通过温度变化和含水量变化试验,测得了水泥剂量为2%、3%和4%的梁式试件的温度收缩系数和干缩系数。
2.
The experimental results prove that the electric resistance strain gage with the length greater then 50mm can be adopted to carry out the effective data.
采用电阻应变测试法对GFRP杆件的弹性模量测量进行了尝试,结果表明,采用50 mm以上电阻应变片可以有效得到弹性模量测试结果。
5) strain resistance
应变电阻片
1.
The part of the hardware includes strain resistance, signal detecting circuit, data acquisition and processing system, etc.
硬件部分主要包括应变电阻片、信号检测电路、数据采集与处理系统等。
6) Resistance Strain Chip
电阻应变片
1.
The data measured by FBG and resistance strain chip are compared with their theoretical values.
利用光纤光栅作为传感元件,对螺纹钢标准拉伸试验试件的拉伸应变特性进行了分析与测量,采用电阻应变片作为对比测量,并与理论值进行了比较。
2.
On the basis of the stress sensing experiments of equivalent strength standard beam, two strain measurement methods of fiber grating and resistance strain chip are experimentally contrasted.
基于等强度标准梁应变实验 ,对光纤光栅与电阻应变片两种应变测量方法进行了实验对比 。
补充资料：应变计
应变计
strain gauge
yingb泊nji应变计(s俪n罗uge)能将被试件的应变量转换成电阻变化t的敏感元件。电阻应变计的简称，曾称为电阻应变片或应变片。它沿着整个长度枯贴或固定到被测件的表面上，其电阻随表面的变形而发生变化。应变计按基底材料分，有纸基底、胶基底(树脂基底)、玻瑞纤维增强基底等;按敏感栅材料分，有康铜、卡玛合金等金属材料，也有各种半导体材料;按结构和加工分，有丝式、悄式、薄膜式等;按敏感栅形状分，有单轴式、多轴式、全桥式等;还有按使用温度范围等的分类。应变计特性主要包括:电阻、应变计灵敏系数、横向灵敏度、灵敏系数的温度系数、热输出等。应变计通常用于测定材料的机械性能，结构的应力分析，以及在应变式测力传感器等有关的计星仪器中用作敏感元件。(施昌彦)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条