1) dynamic stiffenss ratio
动刚度比
2) springrate ratio
动静刚度比
1.
Mechanical properties and springrate ratio of ethylene propylene diene monomer vulcanizate;
三元乙丙橡胶硫化胶力学性能及动静刚度比(英文)
3) ratio of static stiffness to dynamic stiffness
静动刚度比
1.
According to the experimental results which were obtained by dilapidated dynamic test on four model deck beam girder from intact to destroyed, combined with the kinetic theory on bridge structures,the experiential formula between the ratio of static stiffness to dynamic stiffness (β) and the ratio of frequency (α) were founded by nonlinear regression method.
根据板梁模型从完整到破坏不同荷载等级作用下室内静、动力试验成果,并结合结构动力学理论,应用非线性回归方法,建立起RC板梁静动刚度比(β)与频率比(α)的回归关系式。
4) specific stiffness
比刚度
1.
Bionic design of column structure of machine tool for high specific stiffness;
机床立柱高比刚度结构仿生设计
2.
The application environment for remote sensor in space is described and the importance of selected material and its effect on design of the Three Mirror Anastigmat(TMA)remote sensor are introduced,the new materials SiC and SiC/Al with high-thermal conductivity and high specific stiffness are selected to design for a lighting TMA remote sensor.
简述了空间遥感器的空间应用环境和三反射镜消像散(TMA)轻型遥感器的特点,介绍了遥感器设计中材料选择的重要性及影响,在TMA轻型遥感器研制中选用了具有高导热性和高比刚度的SiC和SiC/Al复合材料。
3.
Introducing the specific stiffness structural effectiveness, the simulation results of optimization show that the seat topology optimization structure based on density method can meet the naval gun\'s engineering needs, which can provide references for lightweight design of naval gun.
在引入比刚度结构效能的情况下,对比分析优化前后的仿真结果,表明基于密度法的基座拓扑优化设计结构能够满足该舰炮的工程实际需要,为舰炮轻量化设计提供参考和借鉴。
5) Stiffness ratio
刚度比
1.
Analysis of the effect of stiffness ratio on dynamic characteristics of arch transfer floor;
刚度比对拱式转换层的动力特性影响分析
2.
It is found that the formation of the active earth pressure relies mainly on both the stiffness ratio k of the media and the homo.
给出主动土压力产生的的充要力学条件判据,发现主动土压力的产生与两种不同介质的刚度比k和材料的均匀性指标有极大关联性。
3.
The distribution of stress and displacement near the transition section are discussed for different stiffness ratios.
将轨道结构简化为弹性支承交叉地基梁系,建立了有碴轨道结构路桥过渡段的空间计算模型,采用ANSYS有限元分析软件对过渡段结构进行了静力分析,并对不同的竖向支承刚度比时过渡段钢轨及轨枕的应力及位移进行了讨论。
6) high specific stiffness
高比刚度
补充资料:比刚度
分子式:
CAS号:
性质:又称比刚度。材料的机械强度(通常指拉伸强度)与其相对密度之比值。单位为兆帕。用于比较不同材料在相同质量下的强度。塑料和增强塑料的比强度可以达到或远远超过金属材料,如钢材和硬铝制品。复合材料具有优异的比强度。
CAS号:
性质:又称比刚度。材料的机械强度(通常指拉伸强度)与其相对密度之比值。单位为兆帕。用于比较不同材料在相同质量下的强度。塑料和增强塑料的比强度可以达到或远远超过金属材料,如钢材和硬铝制品。复合材料具有优异的比强度。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条