1) two-position threeway solenoid valve
二位三通电磁阀
2) 2/2port solenoid vale
二位二通电磁阀
3) Two position four way solenoid valve
二位四通电磁阀
4) three position four-way electromagnetic control valve
三位四通电磁控制阀
5) three-way solenoid valve
三通电磁阀
1.
Experimental studies were conducted to investigate the effects of driving parameters,such as driving voltage and negative demagnetizing pulse,on the dynamic response performance of a three-way solenoid valve in the common-rail fuel injection system.
通过实验研究了驱动电压、反向消磁脉冲等驱动参数对共轨燃油喷射系统中三通电磁阀动态响应性能的影响,同时对驱动参数进行了优化控制。
6) three-way solenoid valve
电磁三通阀
补充资料：安全阀标准汇总（二）
标准编号 | 标准中文名称 | 标准英文名称 |
BS EN 13953-2003 | 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀 | (Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)) |
BS EN 13648-1-2002 | 冷凝容器.防超压保护设施.冷凝设备的安全阀 | (Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service) |
BS EN 1489-2000 | 建筑物阀门.压力安全阀门.试验和要求 | (Building valves - Pressure safety valves - Tests and requirements) |
BS EN ISO 10432-2000 | 石油和天燃气工业.下井设备.地下安全阀设备 | (Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment) |
EN ISO 10432-1999 | 石油和天然气工业 下降孔设备 地下安全阀设备 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999) |
EN 1489-2000 | 建筑阀门 压力安全阀门 试验和要求 | Building valves - Pressure safety valves - Tests and requirements |
prEN 45512-1994 | 采购指南 管道系统和阀 包括安全阀的锅炉和高压管道阀 | Guide for procurement - Pipework and valves - Boiler and high pressure piping valves including safety valves |
EN 13648-1-2002 | 低温容器 抗过压保护安全设备 第1部分：低温服务用安全阀 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
prEN ISO 4126-1-2003 | 防止过压防护的安全装置 第1部分：安全阀 | Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003) |
prEN ISO 4126-4-2003 | 保护额外压力的安全设备 第4部分：飞行员操作安全阀 | Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003) |
BS 1123-1-1987 | 压缩空气或惰性气体装置用安全阀、计量表和易熔塞.第1部分:安装实用规程 | (Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation) |
BS 6759-2-1984 | 安全阀.第2部分:惰性气体或压缩空气用安全阀规范 | (Safety valves - Specification for safety valves for compressed air or inert gases) |
BS 6759-1-1984 | 安全阀.第1部分:蒸汽与热水用安全阀规范 | (Safety valves - Specification for safety valves for steam and hot water) |
BS 6759-3-1984 | 安全阀.第3部分:工作流体用安全阀规范 | (Safety valves - Specification for safety valves for process fluids) |
DIN 3394-3-2004 | 自动控制阀.第3部分:压力为4巴及以下的0级减压安全阀 | (Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar) |
DIN 5589-1990 | 有轨车辆的压缩空气装置.安全阀.安装和连接尺寸.要求 | (Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements) |
DIN EN ISO 10432-2000 | 石油和天燃气工业.下山巷道设备.地下安全阀规范 | (Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999); German version EN ISO 10432:1999) |
DIN 87901-2001 | 泵用双向安全阀 | (Sniffle valves for pumps) |
DIN EN 1489-2000 | 建筑物阀门.压力安全阀门.试验和要求 | (Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000) |
DIN EN 13648-1-2002 | 冷凝容器.防超压保护设施.第1部分:冷凝设备的安全阀 | (Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service; German version EN 13648-1:2002) |
DL/T959-2005 | 电站锅炉安全阀应用导则 | |
JIS B8652-2002 | 比例电动液压减压阀及安全阀的试验方法 | (Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves) |
JIS B8210-1994 | 蒸汽锅炉和压力容器.弹簧式安全阀 | (Steam boilers and pressure vessels -- Spring loaded safety valves) |
JIS B8414 AMD 1-2003 | 热水器用安全阀(修改件1) | (Relief valves for hot water appliances (Amendment 1)) |
JIS B8210 ERRATUM 1-2001 | 蒸汽锅炉和压力容器.弹簧式载荷安全阀(勘误1) | (Steam boilers and pressure vessels -- Spring loaded safety valves (Erratum 1)) |
JIS B8225-1993 | 安全阀排放系数的测定方法 | (SAFETY VALVES - MEASURING METHODS FOR COEFFICIENT OF DISCHARGE) |
JIS E7701-1992 | 高压气罐车用气罐安全阀 | (Safety valves for high pressure gas tank car tanks) |
JIS B8414-1999 | 热水器用安全阀 | (Relief valves for hot water appliances) |
ISO 4126-1-1991 | 安全阀.第1部分:通用要求 | (Safety valves; part 1: general requirements) |
ISO 10417-1993 | 石油和天然气工业.地下安全阀系统.设计、装配、操作和修理 | (Petroleum and natural gas industries; subsurface safety valve systems; design, installation, operation and repair) |
GB/T12241-2005 | 安全阀一般要求 | |
GB/T12243-2005 | 弹簧直接载荷式安全阀 | |
HG 3157-2006 | 液化气体罐车用弹簧安全阀 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条