1) thermal-shock resistance
抗热冲击;抗热冲击能力
2) thermal shock resistance
抗热冲击
1.
The close-knit interface and full structure of Ti/Al_2O_3 functionally graded materials(FGM) were obtained by hot pressing sintering method,its thermal shock resistance was studied under the temperature difference 1?000?℃ and 600?℃.
采用热压烧结(HP)技术制备了界面结合紧密、结构完整的Ti/Al2O3梯度功能材料,并分别在1 000℃、600℃温差下对其抗热冲击及抗热疲劳性能进行了研究。
3) thermal-shock resistance
抗热冲击性能
1.
Their performance of sintering,shearing strength between layers and thermal-shock resistance were studied.
采用超高压力通电烧结工艺制备了添加1%TiC和1%La2O3的W/Cu功能梯度材料(FGMs),分析研究了其烧结性能、层间剪切强度及抗热冲击性能。
2.
What′s more,the specimens still demonstrate good performance in testing thermal-shock resistance.
通过超高压力通电烧结制备了添加1%TiC和1%La2O3的W/Cu FGM,研究了其烧结、层间剪切强度及抗热冲击性能;此功能梯度材料气孔率在11%左右;在激光功率密度200 mW。
4) thermal shock resistance
抗热冲击性能
1.
The effect of rare earth elements on thermal shock resistance of cold roller steel 9Cr2Mo was investigated by means of X ray diffraction and metallographic microscopy.
利用X射线衍射仪和金相方法研究了稀土元素对 9Cr2Mo冷轧辊钢抗热冲击性能的影响。
2.
The tensile strength at high temperatures and the thermal shock resistanceof ductile iron with Ni,Cr,and Mo have been found to be increased while the oxidation re-sistance has been found to be improved significantly.
研究了Ｎｉ，Ｃｒ，Ｍｏ，Ｓｉ，Ａｌ和Ｃｅ等元素对高镍奥氏体球墨铸铁高温性能的影响，并探讨了其影响机理，结果表明，Ｎｉ，Ｃｒ，Ｍｏ能显著地提高高温力学性能、抗氧化性能和抗热冲击性能，Ａｌ，Ｓｉ，Ｃｒ和微量稀土Ｃｅ能有效地提高抗氧化性能，Ｃｒ和Ｍｏ于晶界处形成碳化物，高温时阻碍晶界滑移及裂纹扩展。
3.
Although anodic films have a high thermal performance, their thermal shock resistance is poor because of the great difference of thermal expansion coefficient between aluminum and its anodic film.
研究了铝板表面前处理以及阳极氧化过程中电解液温度对阳极氧化膜层抗热冲击性能的影响,并分析了影响机理。
5) ability to withstand shock loading
抗冲击能力
1.
A self-designed ABR/aerobic process was used to treat domestic sewage from barracks area,and the removal efficiency of pollutants and the ability to withstand shock loading were investigated.
采用自行设计的ABR—好氧工艺处理营区生活污水,考察了其对污染物的去除效果和抗冲击能力。
6) anti-impact force
抗冲击力
1.
This resistance can be viewed as three anti-impact lines of defense and three anti-impact forces.
我们不妨把这种抵抗概括为三道抗冲击防线和三种抗冲击力。
补充资料：标准操作冲击电压波形(见冲击电压发生器)
标准操作冲击电压波形(见冲击电压发生器)
standard switching impulse voltage waveform
b .oozhun CooZuo ChongJld，onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条