说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 最佳操作条件,最佳运行条件,最佳工况
1)  optimum operating condition
最佳操作条件,最佳运行条件,最佳工况
2)  optimum condition
最佳工况,最佳条件
3)  optimum operation condition
最佳操作条件
1.
In the tests,the optimum operation conditions are determined.
以选厂为试验场地进行浮选工艺正交试验,确定了最佳操作条件。
4)  the optimum operating condition
最佳运行条件
5)  the best work term
最佳工作条件
6)  Optimum condition
最佳条件
1.
Selection of optimum conditions for radioactive measurement;
放射性测量最佳条件的选取
2.
It further points out the optimum condition of peeling.
通过实验研究表明:巴旦杏仁乳饮料品质改良的关键在于护色和防止脂肪上浮及蛋白质颗粒下沉,针对上述问题选择适当的脱皮剂,乳化剂及调节乳液的pH值,得到巴旦杏仁去皮最佳条件为:0。
3.
Researching the synthesis experiment of 4-(o-hydroxyphenyl)-3-butene-2-ketone by three factors and three levels of orthorhombic method, analysizing and discussing two test targets, the author eventually determines the optimum condition of making aim product, which is the temperature, 18℃; agitation time, 18 hours; acidity, the volume of fifteen percent of sodium hydroxide, 110 milliliters.
运用三因素三水平正交试验法研究了 4 -邻羟基苯基 - 3-丁烯 - 2 -酮的制取实验 通过对两个实验指标的分析和讨论 ,确定了制取目的产物的最佳条件为 :温度 ,18℃ ;搅拌时间 ,18h ;酸度 ,15 %NaOH溶液 110m
补充资料:铣削加工最佳切削条件
铣削加工一般来说,均属于高效率加工。
  在端面铣削当中,所采用的刀具根据其运用范围有不同的形状和种类。刀具的切刃,由于切削过程的摩擦,急剧加热,在空转时急剧冷却下来,要求非常严格。因此,要求刃具有耐冲击性、耐磨损性和耐热性。
  为了在刀具刀尖上缓和冲击,并容易流出铁屑,必须充分研究刀尖的形状。选择端面铣削刀片的前角有两种:一种是与工件接近90度的加工面的肩削形,一种是对刀具磨损有利的平削形。采用平削形刀刃冲击小,切削厚度小,在平削形中,由于后角大,对刀具耐磨损有利,但由于轴向产生分力回引起震动,所以常采用45度后角。
  刀具的有效直径和刀刃数的选择,视被加工材料而定。为了获得经济性稳定的铣削作业,必须充分选择适当的切削条件。充分考虑各方面因素。如被切削材料、硬度、机床的功率和刚性、刀具的形状等因素
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条