1) minimum arc voltage
最小起弧电压
2) minimum arcing voltage
最小建弧电压
1.
It was found that when the capacitive ignition occurred, arc voltage will keep minimum arcing voltage, but arc current possibly attenuates in sinusoidal form with different circuit parameters.
在火花试验装置上进行爆炸试验,得到本质安全复合电路的放电波形,发现电弧电压基本维持在最小建弧电压,而电容电流随着电路参数的不同而发生振荡。
2.
It draws conclusions that discharge time is no less than time constant, current reduce rate is in inverse proportion to the value of inductance, arc resistance when the arc occurs is the product of stable current and minimum arcing voltage.
指出放电时间不会小于电路的时间常数 ;电弧电流变化率与电路电感成反比 ;放电瞬间的电弧电阻为最小建弧电压与稳定电流的乘积 ;如果电源电压小于最小建弧电压 ,电弧功率将随时间而减小 ;电感储能与电源供给能量的比值与电源电压成反比 。
3.
After analyzing actural discharge process,minimum arcing voltage is introduced, discharge time can be expressed by circuit parameters, the conclusion is obtained that discharge time is in proportion to the product of inductance and stable current.
通过分析电弧放电实际过程，引入最小建弧电压，放电时间不但可由电路参数直接表示出来，而且得出放电时间与电感和稳定电流的乘积成正比的结论。
3) arcing voltage
起弧电压
1.
In order to solve the problem of high energy consumption in the process,the factors which affect arcing voltage of micro-arc oxidation on aluminum alloy were studied.
针对目前微弧氧化技术中存在的电能消耗高的问题,对影响铝合金微弧氧化起弧电压的因素进行了研究,分析溶液成分和含量、工艺条件等因素对起弧电压的影响。
2.
The influences of concentration of NaOH on the arcing voltages,characteristics of spark spot of the sample in microarc oxidation,the rate of c.
通过改变NaOH的浓度研究其对微弧氧化的临界起弧电压、微弧氧化过程中试样表面火花形态、陶瓷膜的生长速率及陶瓷膜厚度的影响。
4) restriking voltage
再起弧电压
6) minimum flashover voltage
最低闪弧电压
补充资料：最小辐亮度与最小辐照度(见核爆炸火球)
最小辐亮度与最小辐照度(见核爆炸火球)
minimum-brightness and minimum-irradiance
zuixiao fuliangdu yu zuixiaofu乙haodu最小辐亮度与最小辐照度(minimum-brightness and而nimum一irradianee)见核爆炸火球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条