1) measuring range
测量范围，量程
2) measurement range
量程，测量范围
3) measuring range
测量范围
1.
The working principle of the self-calibrated thrice measur e ment and the measuring amplifier and the nonlinear modifying technique are intro duced, which is based on the software and hardware to expend the measuring range and to realize intelligent measurement.
本文阐述了实现高精度、宽测量范围、基于气动测量原理的压缩机自动选配系统的工作原理和主要设计方法,介绍了用于提高零件测量精度、扩展气动测量范围和实现智能测量的建立在软硬件基础上的自校准三次测量法、增益可编程控制测量放大器和非线性修正技术的工作原理,给出了部分软件的流程图,并对误差修正前后的测量系统的精度进行分析,用试验进行验证。
2.
The analysis indicates that this method results in a higher sensitivity to β radioactive aerosol and a wider measuring range.
分析结果表明,该方法对β放射性气溶胶的测量灵敏度高,测量范围广。
3.
For instance,the measuring range expanded to 10: 1.
介绍了孔板流量计的历史状况及其发展现状,说明自从引入微机技术以后,孔板流量计的测量精度和对环境影响的修正补偿能力均有了大幅度的提高,如测量范围扩大到10:1。
4) measurement range
测量范围
1.
Introduction to flow measurement range of throttle device;
浅谈节流装置流量测量范围
2.
Compared with the conventional triangulation measurement system, the measurement range in this system is prolonged while the high measurement accuracy and the high resolution are kept.
与传统激光三角测量相比 ,该系统在保持高测量精度及高分辨率的同时 ,扩展了测量范围 。
3.
In order to increase the measurement range and improve linearity level, a method to detect the scattered light at an angle of 30 degree with the incident light during measuring higher turbidity were suggested.
导出了浊度测量的灵敏度、最大测量范围与测量仪器的光学参数之间的关系。
5) measuring range
量测范围
6) Large measuring range
大测量范围
补充资料：量程
分子式：
CAS号：
性质： 测量范围的上限值和测量范围的下限值的代数差。例如：范围为0～100℃时，量程为100℃；范围为20～100℃时，量程为80℃；范围为-20～100℃时，量程为120℃。
CAS号：
性质： 测量范围的上限值和测量范围的下限值的代数差。例如：范围为0～100℃时，量程为100℃；范围为20～100℃时，量程为80℃；范围为-20～100℃时，量程为120℃。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条