1) lateral yielding
横向塑性变形
3) axial plastic deformation
轴向塑性变形
4) lateral plastic deformation
侧向塑性变形
1.
Firstly,dissipated energies induced by axial and lateral plastic deformations due to shear strain localization initiated at peak strength in strain softening stage is analyzed.
首先从能量的角度分析了单轴压缩岩石试件轴向及侧向塑性变形的耗散能量及其联系。
5) transverse deformation
横向变形
1.
- e curve and less transverse deformation will be.
结果表明:混凝土强度越高,应力-应变关系线性段比例越高,横向变形越小,说明越接近均质材料。
2.
,transverse deformation and the ratio of compressive strength to flexural strength(σ_C/σ_F) in order to evaluate the effect of SAE latex on the toughness of cement mortar.
采用横向变形和压折比这2种方法表征了苯丙乳液水泥砂浆的韧性,研究了苯丙乳液对水泥砂浆韧性的影响,并着重探讨了这2种表征方法的关系。
3.
Based on the construction of the North Channel Bridge of Zhu-jiang Huangpu Bridge,the transverse deformation behavior of segments were investigated by mixed finite element model with consideration of the influenced factors such as non-uniform temperature,the location and stiffness of longitudinal truss-like spacer plate.
以黄埔大桥北汊桥独塔双索面扁平钢箱梁斜拉桥为工程背景,采用混合单元建立三维有限元模型,分析了梯度温度变化、桁架式纵隔板位置和刚度对悬拼施工中钢箱梁的横向变形问题的影响,并提出了一些相应的优化措施。
6) transverse deflection
横向变形
1.
Two laser displacement sensors were also used to detect transverse deflection of the saw blade and sawing profile on .
该文应用远红外温度传感器测试锯片沿半径方向的温度分布,两个激光位移传感器分别测量了锯片在外边缘模拟加热条件下锯片的横向变形和锯切工件上的锯痕高度,研究分析了不同温度分布、转速、进给速度、径向槽分布和适张状态下锯片横向变形与锯痕高度的关系。
2.
In this paper, the nonlinear transverse deflection or buckling is analyzed for unsymmetrical composite laminates under loads in plane by means of the generalized Fourier series method.
本文利用广义富里叶级数法对非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲问题进行了分析。
补充资料：横向动量
见多重产生。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条