1) keep-alive voltage
维弧电压，保弧电压
2) arc voltage
电弧电压
1.
The controlling research of arc voltage of shielded metal arc welding;
手工电弧焊电弧电压控制的研究
2.
Effect of arc voltage on arc stability of MIG welding;
电弧电压对混合气体保护焊电弧稳定性的影响
3.
Study on analyzing droplet transfer characterization by arc voltage fluctuation value;
电弧电压变化量分析熔滴过渡特征的研究
3) crowbar voltage protector
消弧电压保护器
4) arc voltage
弧压，电弧压降
5) arc pressure
电弧压力
1.
High-frequency pulse modulated variable polarity welding power and its arc pressure;
高频脉冲变极性焊接电源及电弧压力分析
2.
Analysis of twin-electrode TIG coupled arc pressure;
双钨极氩弧焊耦合电弧压力分析
3.
The results indicate that the T-TIG welding can avoid the defects of undercut and humping effectively in high current and high speed region on the basis of low arc pressure.
与常规钨极氩弧焊的对比分析表明,由于双钨极氩弧焊降低了电弧压力,提高了焊丝的熔敷率,因而在大电流高速度焊接时,极大地减少了凹坑、咬边等缺陷,实现了良好的焊缝成形,从而改善了常规钨极氩弧焊不适合大电流高速度焊接的不足,拓宽了钨极氩弧焊的使用范围,提高了焊接生产率。
6) arcing voltage
起弧电压
1.
In order to solve the problem of high energy consumption in the process,the factors which affect arcing voltage of micro-arc oxidation on aluminum alloy were studied.
针对目前微弧氧化技术中存在的电能消耗高的问题,对影响铝合金微弧氧化起弧电压的因素进行了研究,分析溶液成分和含量、工艺条件等因素对起弧电压的影响。
2.
The influences of concentration of NaOH on the arcing voltages,characteristics of spark spot of the sample in microarc oxidation,the rate of c.
通过改变NaOH的浓度研究其对微弧氧化的临界起弧电压、微弧氧化过程中试样表面火花形态、陶瓷膜的生长速率及陶瓷膜厚度的影响。
补充资料：标准操作冲击电压波形(见冲击电压发生器)
标准操作冲击电压波形(见冲击电压发生器)
standard switching impulse voltage waveform
b .oozhun CooZuo ChongJld，onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条