1) flexural rigidity
抗挠刚度;弯曲刚度
2) stiffness of paper
抗挠刚度
3) bending rigidity
弯曲刚度
1.
Discussion on bending rigidity anisotropy of fabrics;
织物弯曲刚度各向异性探讨
2.
Bending deformation and bending rigidity of mechanical components;
机械构件的弯曲变形与弯曲刚度
3.
Approach to calculating bending rigidity of rubber-reinforced track of tractors and its experimental verification;
拖拉机橡胶钢筋履带弯曲刚度计算方法与试验验证
4) bending stiffness
弯曲刚度
1.
Applied investigation on the effects of bending stiffness of machine bed's simulating parts on its thermal geometrical precision;
机床床身模拟件的弯曲刚度对其热态几何精度影响规律的应用研究
2.
Analysing parameters of bending stiffness of FRP and designing its structure;
FRP弯曲刚度的参数分析与结构设计
3.
Engineering algorithm on bending stiffness of elastic rubber bushing of car suspension;
轿车悬架弹性橡胶衬套弯曲刚度的工程算法
5) Bend stiffness
弯曲刚度
1.
The mechanical models of bend stiffness and bend strength of the pallets girder and deck were established.
通过分析木托盘在均布载荷作用下的受力变形情况,建立了木托盘梁和铺板的弯曲强度和弯曲刚度的力学模型,提出了托盘弯曲强度和刚度的条件。
6) flexural stiffness
弯曲刚度
1.
The relationship between axial stiffness, torsional stiffness, flexural stiffness and deformation has been given.
通过非线性有限元方法对橡胶-钢球支座在轴向拉伸、扭转和弯曲的大变形载荷作用下的力学行为进行分析,得出支座的轴向刚度、扭转刚度和弯曲刚度与变形的关系。
2.
Based on the bifurcation buckling of abnormal beamcolumn steel frame,it was found that the way to ascertain column s effective length of normal steel frame can also be used in abnormal beam-column steel frame;the principle of virtual work was used to deduce the flexural stiffness of two kinds of Abnormal beams,and its effect on the effective length of rigid steel frame column was analyzed.
运用虚功原理推导了两种典型的非规则梁的弯曲刚度,并分析了其对钢框架柱计算长度的影响。
补充资料：抗挠刚度
分子式：
CAS号：
性质：纸或纸板抵抗弯曲的强度性能。挺度与EI/W值成正比，其中W、E和I分别为纸或纸板的质量、弹性模量和惯性矩。纸板的挺度或称抗挠刚度，是指在距夹具5cm处对垂直夹着的试样施加一定负荷，观察从试样中心线弯曲3.81mm宽度，试样至15°所需的弯矩，以g·cm表示。对箱板纸和白板纸来说，挺度是一项基本性能指标。
CAS号：
性质：纸或纸板抵抗弯曲的强度性能。挺度与EI/W值成正比，其中W、E和I分别为纸或纸板的质量、弹性模量和惯性矩。纸板的挺度或称抗挠刚度，是指在距夹具5cm处对垂直夹着的试样施加一定负荷，观察从试样中心线弯曲3.81mm宽度，试样至15°所需的弯矩，以g·cm表示。对箱板纸和白板纸来说，挺度是一项基本性能指标。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条