1) feed system
馈电系统，供电系统;给水系统，进给系统，投料系统，送料系统
2) feeding system
给料系统
1.
Based on the characteristics of the gravity feed,analysing the choice of relevant parameters in feeding system,including the definition of hopper forms and semivertex angle of hopper as well as and the calculation of material delivery speed,two kinds of feeding schemes were designed-feeding structure of double doors and feeding structure of one door.
从研究重力给料的特点出发,分析了给料系统中有关参数的选择,包括料斗形式和料斗半顶角的确定,物料速度的计算,设计出重力给料的2种给料方案,即双料门供料机构和单料门供料机构。
2.
The frame and the feeding system of the crushing are important parts in the impacting-crushing station.
破碎工作站的机架和给料系统是该设备的关键部件,其动态特性直接影响整机的工作可靠性,本文通过理论分析并结合有限元分析方法对机架及给料系统进行研究,其结果将为设备的设计和改进提供重要依据。
3.
The big bale feeding systems adopted by yellow straw directly fired power plants in north Europe and China are analyzed.
以黄色秸秆生物质直燃发电项目为研究对象,通过对北欧和国内部分已投运的黄色秸秆直燃电站大捆给料系统进行分析,指出由于国内外在生物质收集预处理方式上存在的差异,大捆给料系统方式在国内应用时存在大型打捆机械缺乏、打捆成型成本太高以及系统对捆型尺寸变化适应性差的缺陷和局限性。
3) feeder system
给料系统
1.
Design of hardware and software for the master/slave microcomputer feeder system;
主从式微机给料系统的软硬件设计
4) supply system
供给系统
1.
Principle analysis on coordinate development of road transportation supply system;
道路运输供给系统协调发展的机理分析
2.
Deconstruction and optimization of supply chain in large coal enterprises supply system
大型煤炭企业供给系统供应链解构及优化
3.
According to the requirement of the pasty propellant rocket engine design and pasty propellant pipe flow experiment,a new type of pasty propellant supply system is proposed.
依据膏体推进剂火箭发动机设计和膏体推进剂管道流动实验需求,提出了一种新型膏体推进剂供给系统方案。
5) feed system
进给系统
1.
Study on the frictional self-excited vibrating of the feed system in NC machining tool;
数控机床进给系统摩擦自激振动研究
2.
The development trend of feed systems in high speed machine tools;
高速机床进给系统的发展趋势
3.
Zero Transmission of Feed System for Ultra-high Speed Machine Tools;
超高速机床进给系统的零传动
6) Feed drive system
进给系统
1.
Linear motor feed drive system and its key technology;
直线电机伺服进给系统及其关键技术问题
2.
The effect of the non-liner gap on the dynamic characteristic of the feed drive system is important.
间隙非线性是数控机床进给系统精度的重要影响因素。
补充资料：摆动杆式给料机
分子式：
CAS号：
性质：适用于高湿含量、易于黏结的物料，给料机安装在螺旋输送机上。由两根平行、正方形截面的摆动杆构成，摆动角度可改变。料仓出口物料借重力落到给料机摆动杆上，摆动杆有破碎大块物料的功能，并控制物料加到整个螺旋输送机上。
CAS号：
性质：适用于高湿含量、易于黏结的物料，给料机安装在螺旋输送机上。由两根平行、正方形截面的摆动杆构成，摆动角度可改变。料仓出口物料借重力落到给料机摆动杆上，摆动杆有破碎大块物料的功能，并控制物料加到整个螺旋输送机上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条