1) data sampling switch
数据采样开关
2) Sampling switch
采样开关
1.
A novel,highly linear sampling switch suitable for low-voltage operation is proposed.
提出了一种适用于低电源电压的新型高线性度采样开关。
2.
The CEC technique compensates the sampling bandwidth by eliminating the impact from finite on-resistance of the sampling switch,and avoids increasing clock feedthrough and charge injection.
该技术通过消除采样开关有限导通电阻的影响,补偿了采样带宽,并避免了时钟馈通和电荷注入的加剧。
3.
In this paper a facility method evaluationg impulse transfer function of closed loop system is putted forward,which bases on solving continuous system and uses sampling switch s position in discrete system.
提出了一种求取闭环采样系统脉冲传递函数的简易方法,该方法是在求出对应的连续系统传递函数的基础上,再利用采样开关在采样系统中的位置进行求解,具有简便、易掌握的特点,为求取采样闭环脉冲传递函数提供了方便。
3) Data sampling
数据采样
1.
Data sampling interpolation algorithm based on computer sampling theory and its application in modern numerical control system;
计算机数据采样插补算法及其在现代数控系统中的应用
2.
The interpolation algorithm for involution is proposed in accordance with the principle of data sampling.
根据数据采样法的基本思想 ,提出了一种渐开线的插补算法 ,介绍了该方法的基本原理和实现方法 ,对插补的轮廓误差进行了分析 。
3.
According to the basic idea of data sampling interpolation s time division,under the condition of machining quality being guaranteed,the cutter-center path is programmed into some straight line segments,consequently the feed rate between adjacent lines is almost constant.
具体依据数据采样插补的时间分割基本思想,在控制加工精度的条件下,将刀心轨迹离散为若干直线段的同时,确保相邻线段间的进给速度基本恒定。
4) sampling data
采样数据
1.
Analysis and countermeasures of problems about unusual sampling data in microprocessor-based protection;
微机保护采样数据异常问题的分析与对策
2.
First, it gives a method of extracting signal frequency from sampling data Second,it also gives the range of relative errors by the relative errors formulation Finally, the theory is verified under the environment of Matlab and the results are also given The conclusion may be taken as a tutor for research of extracting signal frequency from sampling dat
首先 ,提出了一种从采样数据中提取信号频率的方法 ;其次 ,通过相对误差计算公式给出了此种方法的相对误差 ;且在 m atlab环境下验证了此种算法并给出了仿真结果 ,对从采样数据中提取信号频率的研究有一定的参考意义。
3.
The record of CAT is a series of sampling data.
计算机辅助测试所得记录为一系列经滤波的离散采样数据，要把它恢复成不失真的连续光滑曲线打印输出，应对数据进行处理。
5) sampled data
采样数据
1.
Chaotic anticontrol of a class of two-dimensional continuous time linear systems using sampled data;
基于采样数据二维连续线性系统的混沌反控制
2.
The single parameter sampled data feedback control directs the system to unstable equilibrium point with only one parameter.
对最近提出的Liu混沌系统建立了自反馈控制和单参数采样数据反馈控制方法。
3.
The system state variables are sampled at a given sampled period,and a sine function constructed by the sampled data is used both to form a discrete-time state feedback controller and to make the continuous-time,stable and linear systems chaotic.
针对具有复特征值的稳定连续线性系统,提出了一种基于采样数据的混沌反控制方法。
6) data sample
数据采样
1.
This paper describles the design and implementation method of the virtual battery test system based on FPGA and USB interface technology, And explained the design principle based on FPGA central controller especially, the design of Read and Write module of USB endpoint, the design of muti channel data sample module and the realization of USB interface driven.
论述了基于FPGA与USB接口技术的虚拟蓄电池测试系统设计方案及其实现方法,重点阐述了基于FPGA中央控制器的设计原理,USB端点读写模块的设计,多路数据采样模块的设计及USB接口底层驱动的实现。
补充资料：被动式大气采样器
分子式：
CAS号：
性质：无需动力，通过气体扩散采集气体污染物的一种采样装置。该采样品是根据气体扩散原理和选择吸收的特点设计而成的。其结构由三部分构成(见图示)。A：上盖。上面放置浸渍采样膜。B：圆环。为气体扩散通道；C：带孔下盖。放不锈钢网和聚四氟乙烯微孔滤膜。整个采样器可放入筒状套匣，作为贮备容器。适用于各种场所的空气监测之用；尤其在无动力供给的边远、山岭地区更为适用。采样周期可长达1～2个月。所得污染物为在采样时间区段内空气中的平均浓度。
CAS号：
性质：无需动力，通过气体扩散采集气体污染物的一种采样装置。该采样品是根据气体扩散原理和选择吸收的特点设计而成的。其结构由三部分构成(见图示)。A：上盖。上面放置浸渍采样膜。B：圆环。为气体扩散通道；C：带孔下盖。放不锈钢网和聚四氟乙烯微孔滤膜。整个采样器可放入筒状套匣，作为贮备容器。适用于各种场所的空气监测之用；尤其在无动力供给的边远、山岭地区更为适用。采样周期可长达1～2个月。所得污染物为在采样时间区段内空气中的平均浓度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条