1) computer-aided test
计算机辅助试验，计算机辅助测试
2) computer aided testing
计算机辅助试验
1.
The computer aided testing system for certain turbofan engine test-run is developed with CAT technology according to the test-run characteristics.
针对某型涡扇发动机整机试车的特点,采用计算机辅助试验技术研制开发了一套试车CAT系统,基于虚拟仪器技术的PXI总线数据采集系统和各种抗干扰措施保证了数据采集的可靠性和稳定性,以用户和试车为中心设计的人机界面、基于组态的试车程序定义和试车数据库的建立使系统完全满足了发动机试车大纲的技术要求,系统测试精度高,工作稳定可靠,操作简单,维护方便,达到了提高试车效率、降低试车成本、减轻试车人员劳动强度的目的。
2.
The development of computer aided testing system for certain aeroengine test-run is discussed.
讨论了某型航空发动机试车计算机辅助试验系统的开发;采用模块化的VXI总线仪器和外挂式控制方式开发了数据采集系统;采用对基本试车状态进行组态的方法实现了对发动机试车程序的灵活编辑,使系统可以同时满足常规生产试车和定制科研试车的需求;针对发动机试车信号的特点,采用了不同的数字滤波器进行滤波,有效地滤除信号中的干扰,有助于从信号中提取有用的信息;系统工作稳定可靠,操作简单,维护方便,能够完全满足发动机的试车技术要求。
3.
Based on the development of the computer aided testing technique, combined with the study of the aeroengine test CAT system, and with a computer aided testing system for aeronengine as an example, an anti interference and filtering technique for signal processing is discussed, and applications of the anti interference,digital filtering and analog filtering for the areoengine test are introdued.
以航空发动机试车计算机辅助试验（ＣＡＴ）系统为例，介绍了信号采集与处理中采用的抗干扰措施及滤波技术，以满足ＷＰ系列发动机试车ＣＡＴ系统中稳态、动态和过渡过程参数的采集速度与处理精度的多项技术要求。
3) computer aided test
计算机辅助试验
1.
On the basis of the requirement of type approval test and scientific research test of mechanical seals,a new computer aided testing device for mechanical seal was developed,in which the spring pressure can be dynamically adjusted.
以机械密封型式试验及科研开发试验的要求为依据,研制出了测试性能参数全、弹簧比压可动态调整的机械密封计算机辅助试验装置。
4) CAT
计算机辅助试验
1.
This paper provides theoretical base and a reasonable testing method, that based on the considering the dynamic interaction of the pile-soil, for doing the pile foundation dynamic testing in site, The mode analysis method and CAT (computer-aided test) is used for mode parameters identification.
采用了模态分析方法和CAT(计算机辅助试验)方法对桩基进行了模态参数识别。
2.
A quantity of sensors of various kinds need to be used in Computer Aided-Testing(CAT) system, thereby the calibration of sensors for the system is quite important.
计算机辅助试验(CAT)系统中需要使用各种类型且数量巨多的传感器,传感器校验工作是保证系统整体精度的一项重要环节。
5) computer aided testing
计算机辅助测试
1.
Design and implementation of computer aided testing system for injection molding;
注射成形过程计算机辅助测试系统的设计与实现
2.
The component and operational principle of computer aided testing system for dropping shock were introduced.
0开发了集产品脆值和破损边界曲线测定、包装件跌落试验、包装材料动态缓冲性能测试于一体的计算机辅助测试软件。
3.
The hardware structure of electro-hydraulic proportional valve computer aided testing system was introduced.
介绍了电液比例阀计算机辅助测试系统的硬件构成,将NI公司的虚拟仪器软件LabVIEW 8。
6) CAT
计算机辅助测试
1.
Study on Design of Computer Aided Testing (CAT) System for Clamping Force of Injection Machines;
注塑机锁模为计算机辅助测试系统设计研究
2.
Design of CAT System for Electrohydraulic Servo Control System;
电液伺服计算机辅助测试系统的设计
3.
The CAT System for the Feature of Elect-hydraulic Servo Valve;
电液伺服阀特性计算机辅助测试系统
补充资料：CJ-2计算机控制陶瓷材料高温蠕变试验机
CJ-2计算机控制陶瓷材料高温蠕变试验机
鲡 C」一2计算机控制陶瓷材料高温蠕变试验机 中国科学院上海硅酸生研完所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条