1) overstuff
[英]['əuvə'stʌf] [美]['ovɚ'stʌf]
装填过度
2) sc
超载;过载;过度充电;装填过多
3) packing density
装填密度
1.
When the carrier packing density was 30%,hydraulic retention time was 7h(inc.
在填料装填密度为30%,水力停留时间为7h(其中厌氧3h,好氧4h),pH值在6。
2.
The results obtained from the parallel comparative tests showed that when the carrier packing density is 30~0_0, hydraulic raction time is 10 hours (including 3 hours for anaerobic zone and 7 hours for aerobic zone), influent pH is 6.
采用平行对比试验,试验结果表明:系统在填料装填密度为3000,反应时间为10h(其中厌氧3h,好氧7h),pH值在6。
4) loading density
装填密度
1.
The effects of the mode of press-molding of RDX on the initiation strength of detonators are studied by system analysis of data of resulting charge loading density and density gradient.
该文从药柱装填密度、密度梯度等方面进行分析,讨论了黑索今压药方式对雷管起爆威力的影响,建议采用定压压药方式压制黑索今药柱。
2.
Theoretical and experimental analysis under the conditions of various loading density,propellant,constant volume and variational volume are made.
为了研究火药实际能量的释放规律,通过对几何燃烧模型的分析和修正,建立了相对压力冲量形式的修正模型,并在不同装填密度、不同类型的火药和定容、变容条件下进行了理论和实验分析。
6) To fill too full; overload.
使装填过多;使装载过重
补充资料：非密度制约因素(见密度制约因素)
非密度制约因素(见密度制约因素)
l焦非密度制约因素见生态因素、密度制约后
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条