试样棒,test bar,在线英语词典,英文翻译,专业英语

1) test bar

试样棒

2) test rod

试样棒

3) Standard sample stick

标准试样棒

4) specimen

试样

The relevant tensile test specimens were designed and tested; then the test results were compared and analyzed to obtain the ultimate bearing stress.

首先设计了相应的拉伸试样,进而对试验结果进行了对比分析,得到补焊焊缝的极限承载应力,为补焊管道的安全评价提供了依据。

Elastic-plastic stress fields on the crack-tips were obtained by use of the finite element analysis to the single edge notched bend(SENB) and single edge notched tension(SENT) specimens of irradiated A533B pressure vessel steel at-60 ℃,-40 ℃,-20 ℃temperatures and at various loading levels.

针对经过辐照的A533B压力容器钢,采用有限元方法对单边缺口弯曲和拉伸试样进行弹塑性数值计算。

Two measures for increasing accuracy of spectral analysis was introduced:a)improving specimen design; b)paying attention to making the checking-measuring curve.

介绍提高光谱分析精度的两项措施:(1)改进试样设计;(2)注意检量线的制作。

5) Sample

试样

On the importance of undisturbed soil sample s preparation in geotechnical test;

浅谈原状土试样制备在土工试验中的重要性

The macroscopical survey and micro cosmic analysis of unqualified cold bending test samples of Q235and HP295hot -rolling plate had been stu died.

对Q235及HP295热轧板冷弯不合格试样进行了宏观观察及微观分析。

The effects of different preparation of beer samples on the determination of beer concentration were investigated in the aspects of alcohol content, real extract and original extract, and preliminary study on its contributing factors was also done in this paper.

研究了不同啤酒试样制备方法对测定啤酒中酒精度、真正浓度、原麦汁浓度所产生的影响 ,并初步探讨了影响因

6) test sample

试样

The preparation technology of test sample in infrared absorption spectroscopy analysis;

现代红外光谱分析中的试样制备技术

This paper theoretically analyzes the additional stress of test sample caused by inaccurate axisymmetric stress distribution of the upper and lower grip of tension tester and the meaning of e calculation formula.

主要从理论上分析了由于试验机上下夹头不同轴给试样所带来的附加应力,以及同轴度e计算公式的内在涵义,实际上反映了附加弯曲应力占拉应力的百分数。

7) Test piece

试样

Discussion of tensile property and test piece location;

钢带试样位向及拉伸性能的探讨

In this paper, on the basis of practice, an analysis ismade on the different effects of the surface cementation pre-vention of the casted steel in casting and in inspecting test piece,and a law is reached, i.

本文通过生产实践总结了铸铁件铸入钢管防渗碳的效果与铸入检测试样中钢管防渗碳效果之差别。

8) samples

试样

Through analysing the samples;finding the factors that effect the accuracy of the results and eliminating the disturbances that can improve the accuracy of the examination an employ its complete, rapid and accurote function that beat benefit to the production.

由于科学技术的发展,直读光谱较普遍地应用在钢铁分析中,通过研究,找出试样影响分析准确度的因素,并且消除其干扰,可以提高测试的准确性,充分发挥光谱仪快速、准确配合生产的作用。

9) coupling coupon

试样

10) test pencil

试样

补充资料：三标准试样法

分子式：
CAS号：

性质：发射光谱定量分析的基本方法。用于金属或合金快速分析的持久曲线法和控制样品法。将分析试样和标准样品按确定的分析条件摄谱，以内标原理进行分析；用摄得的标准样品光谱中分析线对强度比的对数lgR，与相对应的标准样品中分析元素的含量对lgC为坐标制作校准曲线。或采用分析线对的黑度差△S与相对应的含量对数lgC为坐标作校准曲线。分析试样的含量由校准曲线上查得。为保证校准曲线的正确，制作校准曲线的标准样品不得少于3个，故称三标准试样法。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

抗压试样压扁试样低倍试样试样加工微试样加强混凝土夹芯板

试样;试样;样本环状试样试样宽度试样制备试样消解试样直径
1) test bar 试样棒 2) test rod 试样棒 3) Standard sample stick 标准试样棒 4) specimen 试样 1. The relevant tensile test specimens were designed and tested; then the test results were compared and analyzed to obtain the ultimate bearing stress. 首先设计了相应的拉伸试样,进而对试验结果进行了对比分析,得到补焊焊缝的极限承载应力,为补焊管道的安全评价提供了依据。 2. Elastic-plastic stress fields on the crack-tips were obtained by use of the finite element analysis to the single edge notched bend(SENB) and single edge notched tension(SENT) specimens of irradiated A533B pressure vessel steel at-60 ℃,-40 ℃,-20 ℃temperatures and at various loading levels. 针对经过辐照的A533B压力容器钢,采用有限元方法对单边缺口弯曲和拉伸试样进行弹塑性数值计算。 3. Two measures for increasing accuracy of spectral analysis was introduced:a)improving specimen design; b)paying attention to making the checking-measuring curve. 介绍提高光谱分析精度的两项措施:(1)改进试样设计;(2)注意检量线的制作。 5) Sample 试样 1. On the importance of undisturbed soil sample s preparation in geotechnical test; 浅谈原状土试样制备在土工试验中的重要性 2. The macroscopical survey and micro cosmic analysis of unqualified cold bending test samples of Q235and HP295hot -rolling plate had been stu died. 对Q235及HP295热轧板冷弯不合格试样进行了宏观观察及微观分析。 3. The effects of different preparation of beer samples on the determination of beer concentration were investigated in the aspects of alcohol content, real extract and original extract, and preliminary study on its contributing factors was also done in this paper. 研究了不同啤酒试样制备方法对测定啤酒中酒精度、真正浓度、原麦汁浓度所产生的影响 ,并初步探讨了影响因 6) test sample 试样 1. The preparation technology of test sample in infrared absorption spectroscopy analysis; 现代红外光谱分析中的试样制备技术 2. This paper theoretically analyzes the additional stress of test sample caused by inaccurate axisymmetric stress distribution of the upper and lower grip of tension tester and the meaning of e calculation formula. 主要从理论上分析了由于试验机上下夹头不同轴给试样所带来的附加应力,以及同轴度e计算公式的内在涵义,实际上反映了附加弯曲应力占拉应力的百分数。 7) Test piece 试样 1. Discussion of tensile property and test piece location; 钢带试样位向及拉伸性能的探讨 2. In this paper, on the basis of practice, an analysis ismade on the different effects of the surface cementation pre-vention of the casted steel in casting and in inspecting test piece,and a law is reached, i. 本文通过生产实践总结了铸铁件铸入钢管防渗碳的效果与铸入检测试样中钢管防渗碳效果之差别。 8) samples 试样 1. Through analysing the samples;finding the factors that effect the accuracy of the results and eliminating the disturbances that can improve the accuracy of the examination an employ its complete, rapid and accurote function that beat benefit to the production. 由于科学技术的发展,直读光谱较普遍地应用在钢铁分析中,通过研究,找出试样影响分析准确度的因素,并且消除其干扰,可以提高测试的准确性,充分发挥光谱仪快速、准确配合生产的作用。 9) coupling coupon 试样 10) test pencil 试样补充资料：三标准试样法分子式： CAS号：性质：发射光谱定量分析的基本方法。用于金属或合金快速分析的持久曲线法和控制样品法。将分析试样和标准样品按确定的分析条件摄谱，以内标原理进行分析；用摄得的标准样品光谱中分析线对强度比的对数lgR，与相对应的标准样品中分析元素的含量对lgC为坐标制作校准曲线。或采用分析线对的黑度差△S与相对应的含量对数lgC为坐标作校准曲线。分析试样的含量由校准曲线上查得。为保证校准曲线的正确，制作校准曲线的标准样品不得少于3个，故称三标准试样法。说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条抗压试样压扁试样低倍试样试样加工微试样加强混凝土夹芯板
©2008 dictall.com