1) sandwich die
夹层板模
2) sandwich plate
夹层板
1.
Prestressed assembled monolithic of concrete sandwich plate and it's service specification
预应力装配整体式混凝土夹层板及其常用规格
2.
In this paper, according to the characteristics of ER fluid, the dynamic properties of a sandwich plate with ER fluid as its core layer were investigated theoretically and experimentally under the condition of small deformation and different applied external electric fields.
本文从电流变液的特性出发 ,对小变形条件和中低电场作用下含电流变液夹层板结构的动态特性进行了理论和实验研究。
3.
in this paper a nine-mode rectangle element of composite sandwich plate isdeveloped and applied to the large deflection analysis of symmetric composite sandwichplates.
本文构造一个复合材料夹层板矩形九节点单元,并应用于对称复合材料夹层板的大挠度分析,并讨论边界条件、夹心剪切模量以及而板和夹心厚度比对复合材料夹层极大挠度的影响,得到一些有意义的结论。
3) sandwich sheet
夹层钢板
1.
Analysis of the forming mechanism and defect during sandwich sheet metal stamping;
夹层钢板冲压的成形机理与缺陷分析
4) sandwich panel
夹层板
1.
The sandwich panel of polyurethane foam is a new structural form which can be widely used in protective engineering,and finite element analysis is executed for the three different types of panels-the sandwich panel of polyurethane foam,the concrete panel glued with steel sheet and the concrete panel under explosive loadings.
聚氨酯泡沫复合夹层板是一种可广泛应用于防护工程中的新结构形式 ,据此对聚氨酯泡沫材料夹层板进行了爆炸荷载下有限元分析 ,并与粘钢混凝土板及混凝土板两种板结构进行了比较 ,验证了聚氨酯泡沫夹层板良好的抗爆吸能性
2.
To reduce the weight of sandwich panels,using the SQP algorithm, we carried out an optimal design of its geometrical dimension and relative density of metal foams under the constraint conditions of no occurrence of any failure modes of compression sandwich panels.
以减轻重量为目标,以不出现各种失效模式为约束条件,应用序列二次规划法对受压夹层板的尺寸以及金属泡沫的相对密度进行了优化设计。
3.
The vibration responses and damping capacity of the sandwich panels with SMA layers are studied.
根据夹层板理论建立具有等厚 SMA层的夹层矩形薄板的横向振动方程 ,利用复模量法分析 SMA的超弹性效应对板的稳态受迫振动响应的影响 ,利用 SMA分段线性应力 -应变模型简化 SMA的超弹性本构特征 ,通过数值计算分析结构的稳态响应特性和阻尼特性 ,及其各种参数的作用规
5) Sandwich plates
夹层板
1.
Finite element analysis for sandwich plates with moderately thick viscoelastic cores
芯板横向可压缩位移模式的夹层板结构动力有限元分析
2.
In this paper a triangular element method of composite sandwich plates is developed for which the bending stiffness and coupling stiffness of faceplates are considered.
本文构造了一个考虑面板抗弯刚度及耦合刚度的三角形复合材料夹层板单元,对复合材料夹层板的总体稳定性进行了计算和分析,讨论了面板铺设、夹心与面板厚度比对临界载荷的影响。
3.
Three types of prestressed concrete structural floor systems including waffle slabs,hollow slabs and sandwich plates used in multi-storey and high-rise buildings with large span(or column grid)6~12m are mainly introduced.
重点介绍了在跨度(或柱网)为6~12m的多层与高层建筑中应用的三种新型的预应力混凝土楼盖结构体系:密肋板、空心板和夹层板,及如何合理地选择这些楼盖体系。
补充资料:夹层
夹层
巍霭粼纂器竺恶早,夹视为
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条