1) wood stud
木立柱
2) wood column
木柱
1.
An experimental study on partially-damaged wood columns repaired and strengthened with CFRP;
CFRP维修加固局部受损木柱的试验研究
2.
Based on Tsai-Wu criterion, the plastic yielding formulation and the corresponding yielding-surface equation of triaxially compressed wood columns are developed.
在Tsai-Wu强度准则的基础上,建立了三向受压木柱的屈服准则及随后的屈服面发展方程。
3) timber column
木柱
1.
Eight timber columns strengthened with CFRP sheets with various enwrapping forms are studied under axial compression.
采用CFRP布作为加固材料,对8根木柱进行了轴心抗压试验,分析了木柱加固前后的力学性能,包括木柱的破坏形态、木柱和碳纤维布的荷载-应变关系以及加固柱极限承载力提高情况,并分析了加固柱极限承载力的影响因素。
2.
Based on the resistance to compression experiment of twenty-one circular timber column,the effectives of the compression property and designing method of reinforced are studied on the timber column reinforced with advanced glass-fiber composites.
通过高强复合纤维粘贴加固技术,对24根圆形木柱进行抗压加固试验,并研究了加固效果和设计方法,分析了纤维粘贴量、包裹方法等因素对圆形木柱受压性能的影响,记录了试件破坏的全过程。
3.
2 timber columns and 12 timber columns strengthened by carbon fiber reinforced polymer(CFRP) subjected to axial compression have been tested.
通过2根短木柱与12根碳纤维加固短木柱的轴心受压试验,研究碳纤维布加固木柱的破坏特征、受力性能及承载力计算方法。
4) wooden pole
木柱
1.
Experimental study on a group of reinforced wooden poles was carried out by using CFRP(Carbon Fibre Reinforced Polymer).
采用碳纤维布对一组木柱进行加固试验研究,结合以往的研究成果得到更为精确的加固计算参考式,对实际工作及日后的相关研究都有积极的借鉴意义。
5) Pillar
[英]['pɪlə(r)] [美]['pɪlɚ]
立柱
1.
A fast strain measurement technique of the NC machine tool's pillars;
数控加工中心立柱应变的快速测试方法
2.
XH6650 High-speed Machining Center Pillar Topology Optimization;
XH6650高速加工中心立柱拓扑优化
3.
According to the structure characters of the bus frame pillars,the end arc is made by die.
根据客车侧骨架立柱的结构特点,立柱端部为圆弧结构,采用冲模成型,从而提高骨架立柱的质量及生产效率。
6) Column
[英]['kɔləm] [美]['kɑləm]
立柱
1.
Finite Element Analysis on Viscoelastic Damped Control of Column Structure of a Machine Tool;
机床立柱的粘弹性阻尼控制有限元分析及研究
2.
Forces Exerted upon the End Plane of the Column of the Large-duty NC Plano Milling and Boring Machine during Cutting at the Limit Feed, and Their Distribution;
按极限进给量切削时大型数控龙门镗铣床立柱端面的作用力及其分布
3.
Approaching repair technology of the cladding materical of support column and jack;
支架立柱、千斤顶镀层修复探讨
补充资料：木立
1.呆立，失神站立。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条