2) thin-walled box beams
等截面梯形箱梁
1.
Cosine functions are supposed to simulate the longitudinal displacement of thin-walled box beams when bended.
假定箱梁的纵向位移沿横截面满足余弦函数分布,考虑荷载沿横向的作用位置的影响,采用广义变分原理推导出了等截面梯形箱梁发生对称挠曲时的剪力滞效应表达式,并与三次抛物线法的计算结果进行对比,证明了计算假定的合理性。
3) trapezoidal box girder
梯形截面箱梁
1.
In this paper, the aberration of trapezoidal box girder is analysed according to the internal force equilibrium and deformation coordination of its box cross-section when unsymmetical load is applied to the girder.
对梯形截面箱梁在偏载作用下发生的畸变进行了分析,并在此基础上导出了梯形截面箱梁畸变惯性矩的计算式,可用此方法计算其畸变应变能。
4) truss_beam bridge with box_section
箱形截面桁梁桥
5) box section girder
变截面箱形梁
1.
Based on the similitude between the differential equation for distortion of box section girder and the differential equation for beam on elastic foundation, We develop in this paper the stiffness matrix for distortion of box girder with various cross sections.
利用箱形梁的畸变微分方程和弹性地基梁挠曲微分方程之间的比拟关系 ,推导出变截面箱形梁畸变分析的单元刚度矩阵 ,该单元刚度矩阵与一般杆系结构的单元刚度矩阵完全相似 ,使得箱形梁桥畸变分析可按一般杆系结构的刚度法进行 。
6) box girder
箱形截面扳梁
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条