1) tube of electric flux
电通量管
2) high flux tube
高通量管
1.
Material of explosion cladding plates tubesheet for the first～fifth effect re-boiler were 16Mn(Ⅲ forging)+90Cu10Ni,material of tubes were 90Cu10Ni(high flux tube,UOP offer),SMAW was applied to tube-tubesheet fillets,the joints were required to 100% radiograph.
一效~五效换热器管板为爆炸复合板16MnⅢ+90Cu10Ni,管子为90Cu10Ni高通量管,管子管板焊接采用SMAW,结构为传统的端面焊接,管头伸出3 mm,管子管板接头要求100%RT探伤。
3) flux tube
通量管
1.
his paper avoids the vector analysis Adopting the concept of flux tube and using the method of field unit,we derive a general formula for the energy density of the magnetic field.
本文避开矢量分析，引入通量管概念，应用场元方法，推导磁场能量密度的普遍表达式。
4) magnetic flux tube
磁通量管
1.
The characteristic velocities and the compatibility relations along characteristics are derived from the system of equations for the motion of thin magnetic flux tubes.
从细磁通量管运动方程组导出了特征速度、特征线及其相容关系。
5) Power ON/OFF control
通电管制
6) charge loading
通电量
1.
The influence of current density, charge loading, pH and NaCl additive on removal of COD and color substances from paper-making wastewater by electroflocculation was studied when iron plate was used as anode.
研究了铁板阳极电絮凝法处理纸业废水过程中,电流密度、通电量、废水的pH值及添加电解质NaCl对废水COD和色度去除效果的影响。
2.
The influence of current density,charge loading,pH and NaCl additive on removal of COD Cr and color substances from paper_making wastewater by electroflocculation was studied when Al plate was used as anode.
研究了铝板阳极电絮凝法处理纸业废水过程中 ,电流密度、通电量、废水的 pH值及添加电解质NaCl对废水CODCr和色度去除效果的影响 。