说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 桶型
1)  barrel shape
桶型
2)  watering bucket model
水桶模型
3)  Bucket foundation
桶型基础
1.
Analysis of the interaction between the bucket foundation structure and the soil on the basis of time domain;
基于时域的桶型基础海洋平台结构—土壤相互作用分析
2.
A linear coupling analysis of infinite element, finite element and contact element of the interaction between bucket foundation and groundsill;
桶型基础结构与土壤相互作用的有限元无限元接触元耦合线性分析
3.
Model tests on horizontal cyclic bearing capacity of bucket foundations in soft clays;
软土中桶型基础水平循环承载力的模型试验
4)  leaky bucket
漏桶模型
1.
The leaky bucket scheme with two thresholds of data buffer is adopted, in which the token generation interval changes with the buffer occupancy.
基于双门限漏桶模型,将上、下门限间的状态分离开,采用生灭过程求出了ATM网中各主要性能参数并进行分析,模拟计算结果表明,这种模型比固定漏率漏桶模型有更好的的服务质量。
5)  model bucket foundation
模型桶基
1.
By comparing the penetration velocity, suction pressure, seepage gradient produced in surface soil and soil plug percentage ratio obtained from the suction-penetration experiment in silt using 7 model bucket foundations with different materials and dimensions, the result reveals that the scale effect of bucket foundations is obvious.
通过对7个不同材料及大小的模型桶基在粉土中的负压沉贯实验过程中的沉贯速度、沉贯负压、桶内表层土中产生的渗流梯度和桶内土塞率的大小的比较,揭示了比尺不同的桶基对贯入过程的影响,为桶基设计和施工提供依据。
2.
Through utilizing the experimental means, as designing model bucket foundation and suction penetration operation process,making up silty sand soil,installing sensor for pore water pressure,and from the direction of the disruptive soil body,the variational relations among .
该设计通过配土、设计模型桶基和负压沉贯的操作过程、设置孔压传感器等实验手段 ,努力从土体破坏的角度 ,寻求负压沉贯过程中沉贯负压、沉贯阻力及孔隙水压力之间的变化关系和确定桶基的上拔力。
6)  barrel-stave
凹桶型
1.
The modeling and calculation of a barrel-stave flextensional transducer is presented based on the finite element method.
用有限元法对凹桶型弯张换能器进行了建模与分析计算。
补充资料:桶型空间


桶型空间
barrelled space

向量空间E中的一个集合A称为平衡集(回all众对set),如果对于所有x〔A和所有满足}川(1的仪,“x〔A成立一个平衡集A仁E称为吸咚馨(a忱othingse‘),如果它吸收E的每一个点,即对于每个x任E存在某个“>0,使得“x 6 A. 线性拓扑空间中的桶集(恢江化1)是指闭的平衡吸收凸集·够掣宇卿是指这样的具有局部凸拓扑的线性拓扑空间:其中每个桶集是零的邻域.Fr改比t空间,特别是E妞nacll空间,是桶型空间的例子.M面侧空间(Montols详代)是重要的一类桶型空间,它显示许多值得注意的性质.桶型空间的商空间、桶型空间的直和以及诱导极限都是桶型空间.由一个桶型空间到另一个局部凸线性拓朴空间的连续线性映射的点态有界集是等度连续的.在一个桶型空间的对偶空间中,按弱拓扑有界的集合也按强拓扑有界,并且按弱拓扑是相对紧的.桶型空间的对偶空间中的紧集的闭凸包是紧的.【补注】桶型空间是使E以mch一Steinhaus定理可以推广的最广的局部凸空间类.它首先在[A4」中引人. E中的一个不一定平衡的集合A称为吸收集,如果对于每个x‘E,存在某个“。,使得xe:A对于所有1引)“。成立.对于桶型空间的对偶,下列四个命题是等价的:l)A是弱有界的;2)A是强有界的;3)A是等度连续的;4)A是弱紧的.最后一个命题可由下列更强的命题得到:桶型空间对于任何。拓扑是拟完全的.(最后一个概念见拓扑向量空间(topofogical从戈仪〕r sps沈);拓扑映射空间(s钾优of n.PPing,topolo乡以1).)捅型空间[加,函目月.瑰;6”e,加e即ocTpa.cT.o} 一种没有可距性条件的显示B..曲空间(玫坦朋hs户Ce)和Fr自为以空间(Fr改hets脚Ce)的许多性质的局部凸线性拓扑空间.它是使E晚.心l一S目目巨峪定理(E以1犯ch一Ste浏ha玛tl洲〕n泊1)成立的最广的空间类之一桶型空间是由N.Bour坟血i首先引人的([ll).
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条