1) wettability adjustment
润湿性调整
2) Wetting-transition agent
润湿性调节剂
1.
To solve the bad bonding interface between well cementing and the filter cake of oil-based darilling fluild,Wetting-transition agent——TSBN and a washing fluid which can change the interface wettability were studied.
针对油基泥浆钻井在套管和井壁所形成的泥饼与固井水泥浆之间的胶结质量不好的现象,本实验室研制出了高效润湿性调节剂-TSBN,调配出了能较好改变油、水两个界面间润湿性的高效清洗剂;并从改变油水界面润湿性能力、清洗液流变性、胶结面质量三个方面对清洗液的评价方法做了初步的探讨。
3) eczema madidans
湿润性湿疹
4) wettability
[英][,wetə'biliti] [美][,wɛtə'bɪlətɪ]
润湿性
1.
Wettability of the Organic Bentonite Modified by MDFFA Mixed With Other Alkyl Quaternary Ammonnium Salts;
MD膜驱剂与烷基季铵盐复配改性粘土的润湿性
2.
Effects of wettability and its evolution on oil reservoir recovery;
润湿性及其演变对油藏采收率的影响
3.
Effects of N_2 protection on wettability of Sn-Cu-Ni-Ce lead-free solder;
氮气保护对Sn-Cu-Ni-Ce无铅钎料润湿性的影响
5) wettability
[英][,wetə'biliti] [美][,wɛtə'bɪlətɪ]
润湿性能
1.
Interface reaction and wettability of the Sn-Zn based lead-free solder alloys;
Sn-Zn基无铅焊接材料的界面反应和润湿性能
2.
Improving the wettability of PET nonwoven fabrics by plasma treatment;
低温等离子体处理改善PET非织造布润湿性能
3.
Design and Fabrication of Bionic Periodic Microstructured Surfaces and Study on Their Wettability;
仿生周期微结构表面设计制备及其润湿性能研究
6) wetting property
润湿性
1.
Influence of low temperature oxygen plasma treatment on the wetting property of polyester/cotton blended fabric;
氧气低温等离子体对涤棉织物润湿性能的影响
2.
Microstructure,shear strengths,and wetting property were investigated.
5Ag焊料中加入体积分数为10%的微米级Cu、Ni颗粒制备了无铅复合钎料,对钎料的显微组织、拉剪及润湿性能进行了研究。
3.
Because it is characterized by the locally heating as well as rapidly rising and falling in temperature of the laser soldering technology,the wetting property of lead-free solder,the microstructures of the joints soldered with lead-free solder and the mechanical properties .
由于激光软钎焊技术具有局部加热、快速加热、快速冷却的特点,在高密度封装器件的无铅钎焊时,能够显著改善无铅钎料的润湿性能,细化无铅焊点的微观组织,提高无铅焊点的力学性能,因此激光软钎焊技术在高密度封装器件(如四边扁平封装器件以及球栅阵列封装器件)的无铅连接中有着广阔的应用前景。
补充资料：润湿剂JFC
分子式：
CAS号：
性质：学名脂肪醇聚氧乙烯醚，又称润湿剂JFC、浸湿剂JFCS、5881万能渗透剂、尼凡丁、渗透剂EA。为淡黄色液体。PH值中性。浊点40～50℃。易溶于水，5%水溶液加热到45℃以上呈混浊状，降温又恢复原状。耐强酸、碱、次氯酸盐、硬水及重金属盐。属非离子型表面活性剂。对各种纤维无亲合力。无毒，不易燃。由脂肪醇与环氧乙烷聚合而得。属非离子表面活性剂，渗透力强，用作纺织、印染及皮革涂层渗透剂、生物酶退浆助剂、农药加工助剂。
CAS号：
性质：学名脂肪醇聚氧乙烯醚，又称润湿剂JFC、浸湿剂JFCS、5881万能渗透剂、尼凡丁、渗透剂EA。为淡黄色液体。PH值中性。浊点40～50℃。易溶于水，5%水溶液加热到45℃以上呈混浊状，降温又恢复原状。耐强酸、碱、次氯酸盐、硬水及重金属盐。属非离子型表面活性剂。对各种纤维无亲合力。无毒，不易燃。由脂肪醇与环氧乙烷聚合而得。属非离子表面活性剂，渗透力强，用作纺织、印染及皮革涂层渗透剂、生物酶退浆助剂、农药加工助剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条