1) spray penetration
喷射深度
2) spoutable bed depth
可喷射床深
3) penetration depth
射流深度
1.
The effects of particle diameter,particle density,nozzle diameter,jet gas velocity,and static bed height on penetration depth were discussed in detail.
对Geldart B、D类颗粒进行了射流深度计算关联式的研究。
2.
5 meter diameter semicircular jetting fluidized bed with 42?mm diameter semicircular nozzle,the transition of flow regime and the penetration depth were investigated.
同时发现射流深度随射流气速变大而增大 ,结合二维射流床射流深度的研究结果 ,得出了射流深度的预测
3.
Experimental results indicated that penetration depth increased with increasing jet gas velocity,while penetration depth decreased with decreasing nozzle pitch.
不同射流管间距下相同射流气速的射流深度相比 ,管间距减小则射流深度减小 ;在较小的管间距和相对高的射流气速下 ,两射流在射流深度之内始终合并 ,表现为射流合并高度 。
4) penetration depth
透射深度
1.
Determination of the critical exposure and the penetration depth of the photosensitive resin for Stereolithography;
光固化快速成形光敏树脂临界曝光量和透射深度的测试研究
2.
Combined with the relationship between evanescent wave penetration depth and incidence angle,a new parabola taper fiber probe is put forward.
结合倏逝波透射深度与光线入射角之间的关系,提出一种新的抛物线锥形光纤探头。
3.
According to the relationship between the penetration depth of the evanescent wave and the incident light angle,with the inner face kf probe to the effect of the light reflection angle,a new parabola taper fiber is put forward and compared with different tape.
根据倏逝波透射深度与光线入射角之间的关系,结合不同形状的探针内面对光线反射角的影响,提出抛物线锥形光纤探头,并对抛物线参数进行了比较。
5) Projective Depth
射影深度
1.
The method estimates projective depth of line measure matrix,does SVD and applies transform to make the result validate.
算法首先对直线测量矩阵估计射影深度,采用SVD(Singular Value Decomposition)分解矩阵,并最后应用变换,使得分解结果真实有效。
6) depth of shine
照射深度
补充资料：射流的平均穿透深度
分子式：
CAS号：
性质：在流化床分布板每个孔口的上方所形成的气体射流对气-固两相的接触和反应有重要作用。据资料射流中的气体交换系数要比流化床中气泡的气体交换系数大数十倍。垂直射流高度的平均值为射流平均穿透深度L。
CAS号：
性质：在流化床分布板每个孔口的上方所形成的气体射流对气-固两相的接触和反应有重要作用。据资料射流中的气体交换系数要比流化床中气泡的气体交换系数大数十倍。垂直射流高度的平均值为射流平均穿透深度L。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条