1) sedimentation rate test
沉积速率试验
2) deposition experiment
沉积试验
1.
The slice contours,the 3D model and the results of the droplet deposition experiment are in a good accordance.
依据金属熔滴喷射沉积工艺特点,采用基于曲率的判别算法对切片轮廓数据进行优化处理,并利用优化后的轮廓数据进行熔滴沉积试验,沉积结果和模型的切片轮廓与三维模型比较一致,验证了该切片轮廓数据获取方案的正确性与可行性。
3) deposition rate
沉积速率
1.
Effects of technological conditions on deposition rate and structure of functional Co-B films prepared by electroless plating;
化学镀工艺对Co-B功能膜沉积速率与结构的影响
2.
Effects of deposition rate on surface topography of Ni-Cr thin film deposited by EB-PVD;
沉积速率对EB-PVD Ni-Cr薄膜表面形貌的影响
3.
Influences of process parameters on deposition rate of CVI-TaC;
工艺参数对CVI-TaC沉积速率的影响
4) sedimentation rate
沉积速率
1.
Modern sedimentation rates and their influencing factors in the China s Xinglin Bay;
厦门杏林湾现代沉积速率及其影响因素研究
2.
Formation of Xijiang Da aosha in Pearl River Delta during the postglacial period from a perspective of sedimentation rates and sediment grain size;
从沉积速率和沉积物粒度看冰后期海侵以来珠江三角洲西江大鳌沙的形成
3.
Modern sedimentation rates in the intertidal zone on the west coastal zone of the Bohai Gulf;
渤海湾西岸潮间带现代沉积速率研究
5) sedimentation rates
沉积速率
1.
A comparative study on recent sedimentation rates in Lake Donghu, Wuhanwith ~(210)Pb and ~(137)Cs dating techniques;
~(210)Pb和~(137)Cs法对比研究武汉东湖现代沉积速率
2.
Honghu, Chaohu and Taihu Lakes in the middle and lower reaches of Yangtze River were selected for understanding the change of sedimentation rates.
对长江中下游洪湖、巢湖和太湖沉积物采用210Pb和137Cs相结合的方法测定沉积速率。
3.
The marine recent sedimentation rates introduce mainly the studies of determined by the￣(210)Pb─￣(210)Bi method and the studies of the radiation determination and data are introduced mainly.
本文主要介绍了用~（２１０）Ｐｂ─~（２１０）Ｂｉ法测定海洋现代沉积速率和数据处理方法的研究。
6) depositing rate
沉积速率
1.
To analyze the effect of plating solution composition on wood electroless nickel plating depositing rate, the plating solution was added in dropping.
为了确定镀液组成对木材化学镀镍金属沉积速率的影响,本文用点滴法加入镀液的方法进行了木材化学镀镍实验,分析了木材化学镀镀镍镀液的主盐浓度、还原剂浓度、络合剂浓度等对金属镍沉积速率的影响,从而得出木材化学镀镍比较理想的镀液组成。
2.
The influences of current density on depositing rate, current efficiency and microstructure of nanocrystalline Co-Ni alloy were studied by means of SEM, TEM, XRD and EDS, and compared with that of conventional electroplating.
采用自制的高速喷射电沉积装置制备了块体纳米晶Co Ni合金 ,利用SEM、TEM、XRD及EDS等方法研究了电流密度对沉积速率、电流效率及Co Ni合金沉积层组织结构的影响 ,并与槽镀沉积层进行了对比。
3.
But there is no report about Ni-Zn-P alloy depositing rate.
但是对Ni-Zn-P合金沉积速率的研究,目前还未见报道。
补充资料：沉积
分子式：
CAS号：
性质：主要指悬浮在液体中的固体颗粒的连续沉降。产生基本上澄清液相的称做澄清(defecation；clarification)。使悬浮的固体颗粒变为稠密的淤浆的称做增稠(thickening)。使不同大小、形状或密度的固体颗粒分为若干部分的称做分粒或分级(classification)。应用于化学、冶金、食品、制糖等工业。
CAS号：
性质：主要指悬浮在液体中的固体颗粒的连续沉降。产生基本上澄清液相的称做澄清(defecation；clarification)。使悬浮的固体颗粒变为稠密的淤浆的称做增稠(thickening)。使不同大小、形状或密度的固体颗粒分为若干部分的称做分粒或分级(classification)。应用于化学、冶金、食品、制糖等工业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条