1) plastic viscosity
塑料粘度
3) non-polar plastics
难粘塑料
1.
Research progress of non-polar plastics surface treated by low-temperature plasma
难粘塑料表面低温等离子体处理研究进展
4) superplastic flow viscosity
塑流粘度
5) plastic viscosity
塑性粘度
1.
Experimental study on high performance cementitious materials with low water demand was conducted through the testing of water requirement of normal consistency, plastic viscosity and mortar flow rate and considering the specific surface area of clinker and slag and the addition of slag and gypsum.
通过对标准稠度用水量、塑性粘度、胶砂流动度 3个指标的考察，考虑熟料比表面积、矿渣比表面积、矿渣掺量和石膏掺量 4个因素，进行低需水量胶凝材料的试验研究，得到的最佳组合为熟料比表面积为 450m2/kg，矿渣比表面积为 540m2/kg，矿渣掺量为 40％，石膏掺量为 6％。
2.
The results showed that with the increase of FAⅠand slag powder replacement,rheological performance of cement paste was improved,plastic viscosity and shear yield stress were diminished,and the elapsed paste fluidity was improved obviously.
采用净浆流动度与NXS-11A型旋转粘度计对掺有矿物掺和料、聚羧酸高效减水剂的水泥浆体进行塑性粘度、屈服剪切应力试验,结果随着FAⅠ、矿粉掺量的增加,水泥浆体的流动性变好,塑性粘度、屈服剪切应力均减小,且浆体的流动度经时损失得到显著地改善。
3.
The yield value and plastic viscosity of the past.
结果表明:碱激发碳酸盐矿-矿渣复合灌浆材料为宾汉姆流体,随硅酸钠溶液浓度增大、模数减小、矿渣掺量增加,浆液的屈服值和塑性粘度增大;掺加缓凝剂后,浆液的流变性能显著改善。
6) mo(u)lding viscosity
模塑粘度
补充资料：塑料粘接
分子式：
CAS号：
性质：利用胶黏剂(黏合剂)将两个塑料件黏合在一起的方法称为塑料粘接。
CAS号：
性质：利用胶黏剂(黏合剂)将两个塑料件黏合在一起的方法称为塑料粘接。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条