1) overlying sand
上覆砂层
2) overlying strata
上覆岩层
1.
Analysis on the mechanism of the face-contacted blocks structure in overlying strata above the longwall face;
采场上覆岩层面接触块体结构的力学机理分析
2.
Analysis on the damage zone of overlying strata and safety layer distance on the upward mining above the longwall goaf
长壁开采上覆岩层损伤范围及上行开采的层间距分析
3.
Based on the experiment with similar material,the laws of the extra subsidence on the surface and the stress vary inside overlying strata by newly increased load on the surface above worked-out area formed by fully mined and partial mined were researched.
通过相似材料模拟实验,研究了全部开采和部分开采条件下的采空区在地表新增荷载后,地表附加沉降和采空区上覆岩层内应力的变化规律。
3) overburden
[英][,əʊvə'bɜ:dn] [美]['ovɚ'bɝdṇ]
上覆岩层
1.
Underground coal seam mining,stope roof caving,overburden subsidence,destruction and even surface settlement is a entire process,a unified system.
通过比值法、"三带"判别法、围岩平衡法、数理统计法对七五煤矿下组煤上行开采的可行性进行了研究论证,得知上行开采是可行的;为上行开采的上覆岩层运动规律理论分析与可行性研究论证提供了重要经验和借鉴。
2.
The casing deformation caused by sand production of unconsolidated sandstones and caving of the overburden is studied .
以东濮凹陷WZ油田历年井况大调查套管损坏资料为依据,在对出砂油井套管损坏形态、层位与射孔状况、岩石性质等因素进行综合分析基础上,对疏松砂岩出砂、上覆岩层坍塌等主要方面导致的套管受力变形进行研究,为探讨及防治措施提供依据。
4) overlying caprock
上覆盖层
5) upper coating
上覆层
1.
2 to conquer the disadvantages existed in the construction and to ensure construction safety and progress,summarizes characteristics and notices of subsurface excavation construction under geological condition of soft upper coating,and gains some useful experience.
介绍了襄渝二线铁路胡安段XYS-02标段新砦沟隧道在现场实际施工中运用明洞暗做施工工艺,克服施工中客观存在的不利因素,确保施工安全和进度的具体运用实例,总结了在软弱薄上覆层地质条件下的暗挖施工特点和注意事项,得出了有益的经验结论。
6) overlaying soil
上覆土层
1.
Simulate the rupture process of the overlaying soil with hard interlayer;
有硬夹层的上覆土层破裂过程的数值模拟
2.
In this paper, the rupture characteristics of the overlaying soil with soft interlayer were studied by plane-strain finite element method.
采用平面应变有限元法,研究了地震断层错动时有软夹层的基岩上覆土层的破裂特征。
3.
The influences of the rupture mode,the overlaying soil thickness and stiffness to the buried pipeline is analyzed by a 3D soil-and-pipe nonlinear ANSYS finite element model.
利用ANSYS程序建立的三维管土非线性有限元模型,计算分析了断层基岩上覆土层的变形破裂形式、土层厚度及土层土质的硬度对埋地管道的影响。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条