1) mystery
[英]['mɪstri] [美]['mɪstrɪ]
铂锡铜合金
2) platinum-copper alloy
铂铜合金
3) Cu-Sn alloy
铜锡合金
1.
Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc.
电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。
2.
The method use SCR continuous casting-rolling system to make conducting wire(Cu-Sn alloy rod) for railway application was introduced.
介绍了采用SCR连铸连轧生产线生产高速电气化铁路接触网线用铜锡合金线坯的方法,用该法生产的产品,具有内部组织细小,均匀的晶粒,强度高,软化温度高,平直度好,耐摩性好,抗蠕变性好等特点。
3.
The paper describes the process ofφ20mm Cu-Sn alloy wirebar production in continuous casting and roiling process,analyzes the impact of the wirebar s oxygen and tin content distribution on production stability, describes the cold-forming process of contact wire manufacturing by drawing machine,and studies and compares anti-drawing strength and extension capability of it.
介绍了采用连铸连轧工艺生产φ20mm铜锡合金线坯的过程,分析了线坯氧含量、锡含量对生产稳定性的影响。
4) tin-copper alloy
锡铜合金
1.
A method to directly determine the tin in the plating bath for a novel acidic bright tin-copper alloy coating was established based on releasing back titration, which was aiming at eliminating the reference of Cu 2+ and preventing the Sn 2+ and Sn 4+ from hydrolysis.
为消除Cu2+的干扰,防止Sn2+,Sn4+的水解,建立了一套采用解蔽返滴定法,不经分离对新型酸性光亮镀锡铜合金镀液中的锡进行测定的分析方法。
2.
Minim copper in new acidic bright tin-copper alloy plating bath was determined by spectrophotometrie method using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol(5-Br-PADAP)as chromogenic reagent,and measuring wavelength was optimized.
采用 5 -Br -PADAP光度法测定酸性光亮镀锡铜合金液中的微量铜 ,优选出最佳测定波长。
3.
By sintering the tin-copper films electroplated from an alkaline solution under different temperatures, several kinds of the tin-copper alloy negative electrodes were prepared.
将碱性镀液中制备的锡-铜膜在不同温度下烧结,制得几种锡铜合金负极材料。
5) Sn-Cu alloy
锡-铜合金
6) Copper-Tin alloy
铜锡合金
1.
Electrochemical behaviors of Copper, Tin and Copper-Tin in electrodepositingCopper-Tin alloy from noncyanide bath have been studied using cyclic voltammetry.
运用循环伏安法，研究了无氰电沉积铜锡合金溶液中Ｃｕ、Ｓｎ的单独电沉积及其它们共电沉积的电化学行为。
2.
A new process of electrodepositing of bright Copper-Tin alloy from noncyanide bath is proposed in this paper.
提出了一种无氰电沉积光亮铜锡合金的新工艺。
3.
This paper summary the development of copper-silver and copper-tin alloy rod for electric locomotive contact materials produced by SCR continuous casting and rolling system,including technology parameters,quality control,alloy rod characteristics,and so on.
本文论述了利用SCR连铸连轧法生产电力机车接触材料用铜银、铜锡合金线坯的开发,包括工艺技术参数、质量控制、合金线坯特性等。
补充资料：铂铜合金
分子式：
CAS号：
性质：是铂基含铜的二元合金。高温下为连续固溶体；低温下，在3％～93％(at)铜成分范围内存在有序转变，相结构由立方晶格变成菱面晶格，致使合金显著强化，有PtCu2.5，PtCu5，PtCu8.5，PtCul5和PtCu25等合金。用高频或中频炉熔炼，铸锭须在均匀化后，加工成材。主要用于制造电器接点和电阻材料。PtCu2.5和PtCu8.5适用作电位计绕组。
CAS号：
性质：是铂基含铜的二元合金。高温下为连续固溶体；低温下，在3％～93％(at)铜成分范围内存在有序转变，相结构由立方晶格变成菱面晶格，致使合金显著强化，有PtCu2.5，PtCu5，PtCu8.5，PtCul5和PtCu25等合金。用高频或中频炉熔炼，铸锭须在均匀化后，加工成材。主要用于制造电器接点和电阻材料。PtCu2.5和PtCu8.5适用作电位计绕组。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条