1) foam volume
发泡体积
2) bubble volume
气泡体积
1.
Calculation method for bubble volume in gas-liquid two-phase flow
气液两相流中上升气泡体积的计算方法
2.
The equations for bubble volume and bubble diameter at last of same stage have been presented.
Ｃ塔）第一阶段终时形成气泡体积及气泡直径的成因进行了分析，并用数学分析方法推导了第一阶段终时气泡体积及气泡直径的计算公式
3) foaming volume
起泡体积
1.
Ross-Miles foam meter is used to measure the foaming volume and half period effected by different material and study their effect on the foam stability and the effecting ru.
利用Ross-Miles泡沫仪,测定了不同物质影响泡沫起泡体积及半衰期,研究了各种物质对泡沫稳定性影响程度及影响规律,初步确定了几种具有明显改进泡沫稳定性的物质。
4) foam volume
泡沫体积
5) foaming system
发泡体系
1.
The mechanism of foam stabilization for foaming system was discussed in this paper.
阐述了泡沫体系的稳泡机理,采用物理发泡方法,研究了不同种类、含量的泡沫稳定剂对丙烯酸酯胶黏剂发泡体系的影响。
2.
Taking PP foaming system as an example,the normal cell number was introduced.
以聚丙烯发泡体系为研究对象,引入当量泡孔数的概念,从当量泡孔数的角度解释膨胀率的变化。
6) melting foaming
熔体发泡
1.
The fabricating process of SiCp reinforced aluminum foam matrix composite was studied by combining the fabricating process of aluminum matrix composite reinforced by SiC particles and the melting foaming process of aluminum foam.
将SiC颗粒增强铝基复合材料的制备技术与泡沫铝熔体发泡技术相结合,探索了制备SiC颗粒增强泡沫铝基复合材料的工艺方法。
补充资料：表面气泡
表面气泡
skin hole
b iaomian qiPao表面气泡(skin hole)钢锭表面上一些开口的孔眼。是钢中气体析出于钢锭表皮而形成的;钢锭模壁潮湿，或使用的保护渣潮湿，在浇注时蒸发出气体，也会使钢锭形成表面气泡。它会使轧材出现深口、裂痕、甚至海绵面等缺陷。其防止措施主要是降低钢液气体含量，保持锭模和保护渣干操。 (汪建农)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条