1) dense phase
致密相
2) relative density
相对致密度
1.
The morphology of surface and crystal structure of films were characterized by means of SEM and XRD,while the transmittance in the visible light region was measured by UV?VIS spectrophotometer and the relative density was calculated based on the measured values.
并通过紫外可见分光光度计测量了薄膜在可见光区的透过率,根据这一结果计算了薄膜的相对致密度,结果表明:采用不同的稳定剂时,薄膜的形貌、择优取向以及相对致密度均会发生变化;单乙醇胺作为稳定剂时,薄膜的致密度和择优取向最好。
2.
Effect of processing parameters on their relative density has also been investigated.
为了给后续的致密化工序(如热挤压)提供较高质量的烧结坯,用扫描电镜和光学显微镜分析了3%C-Cu机械球磨复合粉末所制备烧结坯的显微组织,并研究了工艺参数对其相对致密度的影响规律。
3) transformation-assisted consolidation
相变辅助致密化
1.
The transformation-assisted consolidation is a useful method for consolidatingoxide-ceramic powders in selected systems.
对于某些体系，相变辅助致密化效应尤其值得关注。
4) tight
[英][taɪt] [美][taɪt]
致密
1.
Stress sensitivity of low-permeability tight gas reservoir and its effect on single well productivity;
致密低渗气藏储层应力敏感性及其对单井产能的影响
2.
Seismic recognition of tight heterogeneous reservoirs in Chuanxi depression;
川西坳陷致密非均质储层地震识别技术
3.
As a tight clastic rocks reservoir in deep land-fades strata, T3x gas reservoir is characterized by tightness, low permeability, thin inter-bed, multilayer nappe and high heterogeneity in Xinchang Gas Field.
新场气田须家河气藏属于深层陆相致密碎屑岩气藏,具有致密、低孔渗、薄互层、多层叠置和强非均质性的特点。
5) dense
[英][dens] [美][dɛns]
致密
1.
Preparation of dense high temperature proton conductingceramics SrCe_(0.9)Y_(0.1)O_(3-α);
致密高温质子导电陶瓷SrCe_(0.9)Y_(0.1)O_(3-α)的制备
2.
Objective To investigate technique methods of dense emolization of intracranial aneurysms, factors resulting incomplete embolization.
目的 探讨颅内动脉瘤致密栓塞的技术方法 ,分析不全栓塞的原因。
6) densification
[,densifi'keiʃən]
致密
1.
The densification behavior of the Mg and B reaction sinter was analyzed in theory.
采用高能球磨Mg/B复合粉体作为前驱粉制备了MgB2超导块材,研究了球磨时间、烧结温度和时间等参数对MgB2超导块材致密度的影响,并理论分析了高能球磨Mg/B复合粉体的反应烧结致密行为。
2.
The densification effects of upsetting and repressing are compared,and a technology design principle for closed die forging is suggested .
分析了粉末烧结材料镦粗和复压工艺的致密效果,提出了闭式模锻工艺设计原则。
3.
The deformation and densification laws of sintered powder material in filling cavity process of closed die forging are researched based on the closed die forging experiment of sintered copper cylinder.
通过烧结紫铜圆柱体试样闭式模锻实验，研究了充满模腔过程的变形与致密规律。
补充资料：磁带相对灵敏度
分子式：
CAS号：
性质：磁带相对灵敏度是磁带一项重要的电磁质量指标，是指以相同的录音电流和各自的常规测试偏磁，在被测磁带和基准带上录以相同频率的信号时所产生的差值，通常用分贝(dB)表示。它表征被测磁带与基准带的灵敏度接近程度或互换程度。
CAS号：
性质：磁带相对灵敏度是磁带一项重要的电磁质量指标，是指以相同的录音电流和各自的常规测试偏磁，在被测磁带和基准带上录以相同频率的信号时所产生的差值，通常用分贝(dB)表示。它表征被测磁带与基准带的灵敏度接近程度或互换程度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条