说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 计算解
1)  computational solution
计算解
2)  analytical calculation
解析计算
1.
In combination with a practical project of a pumped-storage hydropower plant, the calculated results of the axial thrust by the methods of analytical calculation and numerical calculation were compared.
结合某抽水蓄能电站实际工程,分别利用解析计算和数值计算两种方法进行了水轮机转轮轴向水推力的比较计算,指出转轮轴向水推力的计算精度主要取决于高压腔内转轮表面所受轴向水推力F11,F21的计算精度,而影响F11,F21值大小的主要因素是止漏环漏水量和高压腔内水流的旋转角速度;当上、下止漏环外径差值较小并假定上、下止漏环漏水量相等的情况下,解析计算方法求出的转轮轴向水推力结果误差不大。
2.
Experimental results show that the proposed analytical calculation method is feasible.
针对谐波电流引起的转子涡流损耗在某些表贴式永磁同步电机中可能会引起很高的温升的问题,研究了一种永磁同步电机转子涡流损耗的解析计算方法,该方法考虑了转子电枢反应和电机有限长的影响。
3)  analytic calculation
解析计算
1.
The analytic calculations of 10 austenitic matrix casting alloys with different compositions agree with the experimental data of those alloys.
与 1 0种不同成分奥氏体基铸造合金实验数据比较 ,解析计算与实验结果相吻合 。
2.
Considering the high accuracy,the complexity of the process and the great consumption of CPU time in digital simulation,steady state performance of the three-phase synchronous generator rectification system was analyzed,the analytic calculation to facilitate the practical application was given,the analytic calculation equations and steps were listed.
针对数字仿真计算具有较好的精度,但过程复杂、计算时间长的特点,对三相同步发电机整流系统的稳态运行特性进行了分析,给出了便于工程计算的解析算法,并列出了解析计算公式及计算步骤。
3.
To develop an efficient beam hardening correction for medical diagnostic X-ray CT(computed tomography),an analytic calculation method was proposed to simulate polychromatic X-ray projections.
为了开发出有效的医学诊断X射线CT(计算机断层扫描)射束硬化校正方法,结合X射线源能谱分布以及数学CT模体内各区域的几何形状和材料成分,提出一种宽能谱X射线投影解析计算方法。
4)  solution coupling calculation
解藕计算
1.
At strong space of degree of humidity control in the system,PID of simple adoption control regulation,space of the temperature,degree of humidity proceeds solution coupling calculation,Space of opposite degree of humidity control the conversion is a control that degree of humidity in wind.
在大空间的温度控制系统中 ,采用简单的PID控制规律 ,对空间的温度、湿度进行解藕计算 ,将空间的相对湿度控制转化为送风含湿量的控制。
5)  Computation analysis
计算解析
6)  analytic computation
解析计算
1.
Two kinds of methods of determinating the explosion height through flight time are discussed in this paper,and one is the analytic computation and compensation method,while the other is the time partial derivative method.
分别讨论了两种通过飞行时间确定爆高的方法:解析计算修正法和时间偏导数法,这两种方法都是通过计算延迟时间来确定爆高,具有自主性强、可靠性高的特点。
补充资料:洪水调节计算(见水库调洪计算)


洪水调节计算(见水库调洪计算)


hongshui tiaojie洪水调节计算J ISUan 见水库调洪计算。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条