2) area limit
区界
3) perimeter of a perimeter-marked area
标界区周界
4) critical zone
临界区
1.
To quench 20 steel in critical zone under different intensity alternation magnetic field and to observe the microstructure after phase transformation.
对20钢进行不同强度交流磁场下的临界区淬火处理,观察相变后的组织。
2.
A theoretical modelling of tensile strength of powder bonded nonwovens is deduced according to the concept of critical zone.
采用临界区思想推出了粉末粘结非织造布拉伸强度的理论估计模型。
5) critical section
临界区
1.
This paper applies "flux increase by degrees method" to measure critical flux and obtain three hydrodynamic operating section of MBR: exceed critical section,critical section and hypo-critical section;Under the condition of MLSS was 6000mg/L and aeration intensity was 0.
本文利用“通量阶式递增法”对临界通量进行了测定,得出膜生物反应器(MBR)的3个水动力学操作区:超临界区、临界区和次临界区;在MLSS=6000mg/L、曝气量=0。
2.
The C++Builder is cited as an instance to illustrate the thread establishment, realizing method of process control and that of multithread synchronization, which includes applications of the critical section, mutex signal and affair.
以C + +Builder为例 ,介绍了线程的创建 ,多线程同步的实现方法 (使用临界区 ,使用互斥量 ,使用事件 ) ,如何实现进程的控制。
3.
This paper introduces the method of how to use TThread which is one of multithreading object classes and how to use Critical Section and Mutexes which are synchronized control object classes provided in Delphi 3.
０ 中提供的多线程对象 Ｔ Ｔｈｒｅａｄ 类，以及临界区、互斥量等同步控制对象类的介绍，阐述了如何编写出简捷、有效的多线程应用程序和安全调用这些程序的方法，并指出在多线程程序开发过程中应注意的事
6) interfacial zone
界面区
1.
A special area with certain thickness located between matrices and fibers is defined as ‘interfacial zone’ in this paper, which consists of a bulk phase (often called as interphase) and two interfaces, that is, the interphase/matrix interface and the interphase/fibre interface.
本研究从实践中发现界面区的存在,并尝试提出界面区的概念。
2.
In this study, the effect of synthetic C-S-H gel hydrothermally produced with a kind of siliceous material and calcia material as raw materials on the interfacial zone between hardened cement paste and aggregate in concrete was investigated.
研究了利用硅质材料和钙质材料经常温常压下水热反应制得的合成C-S-H疑胶对水泥石-集料界面区结构和性能的影响,发现这种合成凝胶对界面区的结构和性能有独特的改善作用。
3.
Cement paste and interfacial zone between aggregate and mortar for concrete were investigated through the method of SEM.
研究了页岩陶粒经不同程度预湿处理后混凝土强度变化规律,并利用扫描电镜对页岩陶粒混凝土集料与水泥石界面区及水泥石基体的显微结构进行了研究。
补充资料：可成型界区窗
分子式：
CAS号：
性质：一特定牌号塑料，用特定设备(例如挤出机)和相应加工工艺(例如挤塑)，能得到优质或合格制件时所需的各加工条件(例如温度、压力、剪切力、时间等)的范围。它取决于制件、模具或机头的设计、所选用成型机械以及对产品质量要求的严格程度，例如在反应注射成型时。以充填时间为横坐标，以混合料初始温度为纵坐标，由五条工艺参数线所围成的一界区窗。在该窗内可制得合格产品。
CAS号：
性质：一特定牌号塑料，用特定设备(例如挤出机)和相应加工工艺(例如挤塑)，能得到优质或合格制件时所需的各加工条件(例如温度、压力、剪切力、时间等)的范围。它取决于制件、模具或机头的设计、所选用成型机械以及对产品质量要求的严格程度，例如在反应注射成型时。以充填时间为横坐标，以混合料初始温度为纵坐标，由五条工艺参数线所围成的一界区窗。在该窗内可制得合格产品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条