1)  halo tolerant
耐盐的
2)  salt resisting
耐盐的
3)  salt-tolerant
耐盐的
4)  salt tolerant
耐盐
1.
HAL1 gene is an important salt tolerant gene in yest.
HAL1基因是酵母中重要的耐盐基因。
2.
To understand the molecular basis of salt-stress response and isolation the key salt tolerant gene , the sal.
日益严重的土壤盐渍化使通过遗传工程手段提高植物的耐盐性成为未来环境和农业发展需要迫切优先解决的问题。
5)  salt tolerance
耐盐
1.
Evaluation of salt tolerance of 9 cultivars of Lolium spp.in germination and seedling stage;
黑麦草属9个品种萌发及苗期耐盐性研究
2.
The Molecular Detection and Salt Tolerance of the Offspring of Maize Transformed BADH Gene;
转BADH基因玉米后代的分子检测及耐盐性分析
3.
The performance evaluation results showed that the plugging agent had heat resistance, salt tolerance, strong adsorption, and better selectivity.
对该堵水剂的性能评价表明,它具有耐温、耐盐、吸附性强、选择性好的特点。
6)  salt resistance
耐盐
1.
Two surfactants with thermal stability and salt resistance properties were observed.
提出两种结构的表面活性剂 ,考察了它们的耐温耐盐性能。
2.
The amphoteric thickening agent with salt resistance was prepared by inverse emulsion polymerization of cationic monomer methacryloyloxyethyl trimethyl ammonium chloride(DMC) and anion monomer sodium acrylate(SAA),at the presence of potassium persulfate as initiator,Span-60 and Tx-10 as emulsification system and nn -methylene bis-acrylamide as cross-linking agent.
以司班-60、TX-10为复配乳化体系,N,N-亚甲基双丙烯酰胺为交联剂,用过硫酸钾引发丙烯酸钠和甲基丙烯酰氧乙基三甲基氯化铵(DMC)进行反相乳液聚合,制备高耐盐的涂料印花增稠剂。
7)  salt-tolerant
耐盐
1.
Isolation and identification of a strain of salt-tolerant Bacillus sp.;
一株耐盐芽孢杆菌的分离与鉴定
2.
A New Salt-tolerant Asparagus F_1 Hybrid — ‘Yansun No.1’;
耐盐芦笋新品种盐笋1号的选育
3.
Improvement of plant salt-tolerant engineering;
植物耐盐基因工程的研究
8)  Salt-tolerance
耐盐
1.
Comparison of the Salt-tolerance of Upland Rice Transferred with BADH and mtlD Genes;
转BADH、mtlD基因旱稻耐盐性比较
2.
Two New Salt-tolerance Tomato Varieties —‘Dongke No.1’and ‘Dongke No.2’;
耐盐番茄东科1号和东科2号的选育
3.
The Indentification and Screening of the Salt-tolerance Tomato Varieties;
耐盐番茄品种的鉴定与筛选
9)  saline resistant
耐盐水
1.
The toughness and saline resistant of DAIP were improved significantly by maleinized ploybutadiene.
研究了顺酐化聚丁二烯(MPB)对间苯二甲酸二烯丙基酯(DAIP)树脂浇铸体冲击性能、耐热性能、介电性能以及耐盐水性能的影响。
10)  acclimated activated sludge
耐盐污泥
1.
The nitrification performances in the conventional activated sludge (non-halophlic activated sludge) system and the acclimated activated sludge system were investigated at different concentration of sodium chloride.
利用批量试验研究了盐度对常规活性污泥(非耐盐污泥)硝化功能的影响;通过逐步提高试验水的NaCl浓度驯化活性污泥,考察了驯化污泥的硝化功能;并进一步研究了适应于某NaCl浓度的耐盐硝化菌在受到盐度冲击时,其硝化功能的变化。
补充资料：耐盐雾
分子式：
CAS号：

性质：高分子材料抵抗盐雾侵蚀的能力。盐雾中的氯化物，如氯化钠、氯化镁，在很低的湿度条件下具有迅速吸潮的性能，且氯离子具有很强的腐蚀活性，致使防护涂层及高分子材料产生强烈的腐蚀和破坏。评定时，在模拟海洋大气或海边大气中盐雾及其他因素为特征，在盐雾箱内配置接近海水成分的水溶液，将其喷成雾状充满箱内，并配合温度、湿度强化腐蚀条件。操作温度一般为（35±2）℃，氯化钠溶液浓度（50±5）g/L，PH值6.5～7.2，称之为中性盐雾试验，有时也有用酸性盐雾进行。喷雾周期有连续喷雾或间歇喷雾两类。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条