1) drainage elevator
脱水提升机
2) dehydration-scoop-type elevator
脱水斗式提升机
1.
The dehydration-scoop-type elevator is one kind of special conveyance facilities,with a double function of that material elevation and dehydration.
脱水斗式提升机是一种较特殊的输送设备,兼有物料提升和脱水的双重作用,它适用于输送一些洗涤后,外在水分较大的湿物料。
3) bucket lifted technique
水桶提升机
1.
This article briefly elaborates how to design the bucket lifted technique on the mineral water automatic production line.
阐述了矿泉水自动生产线上水桶提升机的设计方案。
5) Hydraulic lifting
水力提升
1.
Experiment Study on Lifting Velocity and Concentration of Coarse Particles for Vertical Hydraulic Lifting;
粗颗粒垂直管水力提升速度与浓度的实验研究
2.
The critical lifting silt velocity for vertical hydraulic lifting is investigated by experiments,and the partly theoretical and partly experienced formula on the critical lifting silt velocity calculation for vertical hydraulic lifting is derived.
通过试验分析研究垂直管水力提升临界淤堵流速,推导垂直管水力提升临界淤堵流速的半理论半经验公式。
3.
On the basis of previous researches,the concentration characteristics of large size particles in vertical pipes by hydraulic lifting were studied through experiments and theoretical analyses.
在前人实验研究的基础上,通过实验与理论分析,研究了垂直管水力提升中的固体颗粒浓度特征。
6) hydraulic hoisting
水力提升
1.
Based on the characteristics of solid liquid flows such as their density, concentration, elastic modulus and resistance, the unsteady coarse grained solid liquid flow in hydraulic hoisting is simulated.
根据垂直管固液两相流的特征 ,考虑固液两相流密度、浓度、弹模、阻力等特点 ,对粗颗粒水力提升不稳定流进行数值模拟。
2.
Based on the slurry pipeline transportation theory, the paper studies the pressure-loss form of manganese nodule liquid-solid two-phase flow in the hydraulic lifting pipe, and meanwhile deduces the model of pressure loss and its calculated formulas, which provides theoretical basis for the dynamic design of hydraulic hoisting.
运用浆体管道输送理论,探讨了扬矿管内锰结核两相流的压力损失形式,推导出压力损失模型和计算公式,为水力提升动力设计提供理论依据,且通过模拟计算可知该模型具有较高的可靠性。
补充资料：混合式卸料斗式提升机
分子式：
CAS号：
性质：斗式提升机的一种。其结构与离心式卸料的斗式提升机结构相似。物料的装料方式与离心式卸料的斗式提升机相同。物料按离心式和重力式同时作用进行卸料，在卸料处安装一个导向链轮，使链条向内收缩，这样可使料斗内倾，重力可将料斗内的物料完全卸空。混合式卸料的斗式提升机主要用于输送含有空气的细粉粒或有黏性的物料，它的输送速度要比离心式卸料的斗式提升机要慢。
CAS号：
性质：斗式提升机的一种。其结构与离心式卸料的斗式提升机结构相似。物料的装料方式与离心式卸料的斗式提升机相同。物料按离心式和重力式同时作用进行卸料，在卸料处安装一个导向链轮，使链条向内收缩，这样可使料斗内倾，重力可将料斗内的物料完全卸空。混合式卸料的斗式提升机主要用于输送含有空气的细粉粒或有黏性的物料，它的输送速度要比离心式卸料的斗式提升机要慢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条