1)  borehole shooting
钻井爆破
2)  torpedoing of a borehole
钻井爆破
3)  drilling
钻井
1.
Discussion on increasing slim hole drilling speed;
提高小井眼钻井速度研究
2.
corrosion and protection in drilling;
钻井过程中存在的腐蚀与防腐措施
3.
The mud logging measures and show zone distinguishing under the drilling condition of nitrogen packed-in drilling fluid;
充氮气钻井条件下的录井对策及显示层识别
4)  well drilling
钻井
1.
The multi-branch well drilling technical overview and the latest progress;
多分支井钻井技术综述与最新进展
2.
Oil and gas well drilling operation is taken as an example to analyze the feasibility of applying Activity-Based Cost to the petroleum and natural gas industry in China, probes into the cost driver of drilling cost of influencing the well drilling operation of oil-gas.
以钻井作业为例,对我国石油、天然气生产行业运用作业成本法的可行性进行了分析,探讨了影响油气钻井作业成本的成本动因。
3.
In CBM well drilling construction,oil drilling techniques are basically adopted.
在煤层气钻井施工中,基本上采用石油钻井工艺。
5)  drilling well
钻井
1.
By analying the cost and safety of drilling wells,summing up the experience,in order to apply the XJ350I workover rig widely in these re- gions.
陆良、保山两气田气层埋藏浅,使用钻机钻井成本居高不下,为了降低钻井成本,从2001年开始在两气田使用 XJ350Ⅰ型修井机钻井,通过对钻井中的成本及安全性等方面的分析、总结,为 XJ350Ⅰ型修井机在钻井中能更好地应用提供依据。
2.
BP model in artificial nerve net model is adopted to predict stuck operating mode in drilling well and artificial nerve net software in predicting system is developed in the paper.
采用人工神经网络模型中BP模型对现场的钻井工况进行卡钻预测 ,并开发了人工神经网络实时卡钻预测系统软件。
3.
In view of difficulties of strata division in the no rock-core drilling wells,delamination features of rock stratum units are identified based on section index characters of Carboniferous and Permian strata in Beijing.
针对无岩芯钻井地层时代划分的困难,文章通过对北京石炭系和二叠系层型剖面标志特征的分析,识别了岩石地层单位的分层标志特征,论述了钻井岩屑地质编录的要求和地层钻探特征,建立了太原组、山西组和石盒子组地球物理测井的物性标志特征,阐明通过岩屑地质编录结合物探测井资料能够较好地对钻井进行地层时代划分。
6)  well
钻井
1.
3 coal bed is 450m to 475m,the well structure being second section.
文章总结了14项钻井注意事项,有针对性,可推广。
7)  well boring
钻井
8)  artesian well
钻井
9)  bored well
钻井
10)  shaft boring
钻井
补充资料:钻井
钻井
drilling

   在地质工作中,利用钻探设备向地下钻成的直径较小、深度较大的柱状圆孔。又称钻孔。钻井直径和深度大小,取决于钻井用途及矿产埋藏深度等。钻探石油、天然气以及地下水的钻井直径都较大。主要功用为:①获取地下实物资料,即从钻井中采取岩心、矿心、岩屑、液态样、气态样等。②作为地球物理测井通道,获取岩矿层各种地球物理场的资料。③作为人工通道观测地下水层水文地质动态情况。④用作探、采结合,开发地下水、油气、地热等的钻井。
   钻井通常按用途分为地质普查或勘探钻井、水文地质钻井、水井或工程地质钻井、地热钻井、石油钻井等。
   按岩石破碎方式和所用工具类型,又可分为顿钻和旋转钻。①顿钻,又称冲击钻。用钢丝绳把顿钻钻头送到井底,由动力驱动游梁机构,使游梁一端上下运动,并带动钢丝绳和钻头产生上下冲击作用,使岩石破碎。顿钻钻速慢,效率低,不能适应井深日益增加和复杂地层的钻探要求,逐渐被旋转钻代替。但它有设备简单,成本低,不污染油层等优点,可用于一些浅的低压油气井、漏失井等。②旋转钻 。利用钻头旋转时产生的切削或研磨作用破碎岩石。是当前最通用的钻井方法。比顿钻钻速快,并易于处理井塌、井喷等复杂情况。按动力传递方式,旋转钻又可分为转盘钻和井下动力钻两种:转盘钻在钻台的井口处装置转盘,转盘中心部分有方孔,钻柱上端的方钻杆穿过该方孔,方钻杆下接钻柱和钻头,动力驱动转盘时带动钻柱和钻头一起旋转,破碎岩石。井下动力钻是利用井下动力钻具带动钻头破碎岩石,钻进时钻柱不转动,磨损小、使用寿命长,特别适于打定向井。井下动力钻有涡轮钻、螺杆钻和电动钻等。
   钻井设备按功能分为旋转系统、提升系统、泥浆循环系统。动力与传动系统和控制系统等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条