1) internally fired boiler
内燃锅炉
2) horizontal type internal-combustion boiler
卧式内燃锅炉
3) Horizontal Internal-combustion oil-fired (gas) boiler
卧式内燃燃油燃气锅炉
4) coal-fired boiler
燃煤锅炉
1.
Process characteristic analysis on simultaneous desulfurization and denitriflcation for coal-fired boilers;
燃煤锅炉同时脱硫脱硝技术工艺性分析
2.
Selective catalytic reduction technique for flue gas denitration of coal-fired boilers;
燃煤锅炉的选择性催化还原烟气脱硝技术
3.
Study on desulfrization in coal-fired boiler;
燃煤锅炉的有机钙脱硫研究
5) coal-burning boiler
燃煤锅炉
1.
The principle and technological processes adopted in the revamping project of the desulphurization and dedusting devices of coal-burning boilers in Baosteel Special Steel Branch are introduced.
介绍了宝钢特殊钢分公司燃煤锅炉脱硫改造的原理及工艺流程:含有二氧化硫和烟尘的气体在主塔中旋转并与脱硫液充分接触,利用脱硫液中细小水滴去除烟气中的烟尘,利用氢氧化钠吸收烟气中的二氧化硫,从而使烟气得以净化;脱硫液中的氢氧化钠可用氢氧化钙在沉淀池中再生,从而使其在系统中不断循环,这样既可避免管网的堵塞又降低运行成本。
2.
Main problem of wet flue gas desulfurization with lime in domestic mid-minor-sized coal-burning boiler are pointed out and have been verified with experiments.
用实验证实了目前我国中小型燃煤锅炉烟气石灰湿法脱硫中存在的主要问题 ,分析了存在这些问题的主要原因 ,提出了解决这些问题的法律、经济和技术相结合的综合措施的建议 。
3.
The paper present situation of SO_2/NO_x combined control techniques for coal-burning boiler of power plant,analyze the principles and characteristics of these methods.
介绍了电站燃煤锅炉SO2/NOx联合控制技术的现状,分析了各种工艺手段的工作原理、发展状况和优缺点,并指出我国烟气联合脱硫脱氮技术的发展方向。
6) coal boiler
燃煤锅炉
1.
Development of automatic controller of coal boiler;
自动燃煤锅炉控制器的开发
2.
This paper introduces wet, wet integrated dry and dry fuel gas desulfuration and dedusting integrated technologies of the coal boiler, and analyzes them comprehensively.
介绍了湿法、干湿结合法、干法3种燃煤锅炉烟气脱硫除尘一体化技术。
3.
The over-heated steam temperature of coal boiler has the characteristics of large inertia,large delaying,multi-disturbance and its dynamic performance is changed with the load,so the control for it is difficult.
文章针对这种情况,研究了Fuzzy-PI复合控制算法,并针对某火电厂燃煤锅炉过热蒸汽温度进行了仿真研究。
补充资料：6WN型内燃机车减震器
分子式：
CAS号：
性质：橡胶减震器的一种。为一定直径(Φ100～280mm)、高度(102～250mm)、上部为伞形、下部内圆筒形的纯橡胶产品，模压法生产。用于内燃机车主机隔板，起缓冲、降噪音的作用。可使司机室噪音从85dB降到80dB。模压法生产。
CAS号：
性质：橡胶减震器的一种。为一定直径(Φ100～280mm)、高度(102～250mm)、上部为伞形、下部内圆筒形的纯橡胶产品，模压法生产。用于内燃机车主机隔板，起缓冲、降噪音的作用。可使司机室噪音从85dB降到80dB。模压法生产。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条