1) hydrogen tube
充氢管
2) hydrogen charging
充氢
1.
It is found that the fracture toughness in fusion area decreased with the increasing of hydrogen charging time.
发现不锈钢堆焊层熔合区的断裂韧性随着充氢时间的增加而下降。
3) electrochemical hydrogen charging
电解充氢
1.
A technique of electrochemical hydrogen charging was used to study the behavior of hydrogen-induced cracking.
采用电解充氢方法对2。
2.
A technique of electrochemical hydrogen charging is introduced in this paper to study the hydrogen embrittlement of 21/4Cr1Mo hydrogenation reactor steel.
用电解充氢方法研究了加氢反应器用2-1/4Cr-1Mo钢的氢脆。
3.
A technique of electrochemical hydrogen charging is adopted to study the behavior of hydrogen-induced cracking of 2.
采用电解充氢方法分别对回火脆态和脱脆态2。
4) electrolytic hydrogen charging
电解充氢
1.
The factors influencing hydrogen-induced disbonding were studied through a series of electrolytic hydrogen charging tests.
通过电解充氢试验研究了不锈钢堆焊层剥离断裂的影响因素，并着重分析了这一断裂问题的金属学本质。
2.
The factors influencing hydrogen-induced disbonding are studied through a series of electrolytic hydrogen charging tests, and the finite element method are adopted for computing the distribution of hydrogen concentration in weld overlay structures.
通过一系列电解充氢试验研究了堆焊层剥离的影响因素，并采用有限元分析方法计算了堆焊结构中氢浓度的分布。
3.
The basis,theory and equipment of the electrolytic hydrogen charging test are discussed in detail.
本文对电解充氢法用于不锈钢堆焊层氢致剥离研究的试验依据、原理和试验装置作了详尽的叙述，从试验和理论计算两方面与传统方法进行了比较。
5) electric hydrogen-charging
阴极充氢
1.
The results show that the hydrogen penetrated into the sample after the electric hydrogen-charging aggregated into bubbles in the fusion zone.
利用阴极充氢法研究了堆焊熔合区裂纹形核机理。
6) High pressure filling hydrogen
高压充氢
补充资料：充颎
1.完全明白。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条