1) coaxial filament
同轴丝
2) coaxial electrospinning
同轴静电纺丝
1.
The special attention is focused on the rapid development in the nanocomposite materials such as nanocapsules,core-shell nanofibers and hollow nanotubes or nanofibers by using coaxial electrospinning and coaxial electrospray in the recent couple of years.
简要介绍了基于电流体动力学射流技术的静电纺丝和静电喷涂的基本原理和发展过程,重点讨论了两种同轴射流技术———同轴静电纺丝和同轴静电喷涂技术的研究现状,包括纳/微米包囊、壳-芯结构的纳米纤维和中空纳米纤维或纳米管的制备。
2.
Al2O3/SiO2 coaxial ultromicro-cable was prepared by coaxial electrospinning technique using Al(NO3)3,C8H20O4Si,ethanol,polyvinylpyrrolidone and N,N-dimethylformamide as staring materials.
采用同轴静电纺丝技术,以硝酸铝、正硅酸乙酯、无水乙醇、聚乙烯吡咯烷酮和N,N-二甲基甲酰胺为原料,成功制备了Al2O3/SiO2同轴超微电缆。
3.
PAN/SiO2 coaxial fibers were prepared firstly by coaxial electrospinning using PAN as the core and SiO2 sol as shell,and then C/SiO2 coaxial fibers were obtained with an outer diameter of 1μm after oxidation and pyrolysis of the eletrospun fibers.
以SiO2溶胶为壳层,聚丙烯腈(PAN)溶液为芯层,采用同轴静电纺丝法制备了PAN/SiO2同轴复合纤维。
3) inside-laser coaxial wire- feeding
光内同轴送丝
1.
Laser wire-feeding welding technique is a new research direction in the laser welding technology, this study aims at the deficiencies in the existing wire-feeding welding outside the laser, puts forward a new process of inside-laser coaxial wire- feeding welding, designs a new type of laser wire-feeding welding device.
激光送丝焊接技术是激光焊接技术的一个新的研究方向,本研究针对现有激光光外送丝焊接中存在的不足,提出了一种新型的环形激光光内同轴送丝焊接工艺,设计了一套新型的激光送丝焊接装置。
4) coaxial electrospraying(electrospinning)
同轴电雾化(电纺丝)
5) Axoneme
[英]['æksəni:m] [美]['æksə,nim]
轴丝
1.
This experiment was carried out to investigate the activity of Mg~(2+)-ATPase in axoneme of human spermatozoa.
为探讨Ｍｇ~（２＋）ＡＴＰ酶在精子轴丝内的分布而进行此实验。
2.
Cilia are located on almost all cell types of the human body,the basic structure includes a microtubule cytoskeleton,the axoneme,and the surrounding ciliary membrane.
纤毛广泛分布于人体多种类型细胞表面,是一种结构复杂、功能精细的细胞器,其基本结构包括轴丝和外被的纤毛膜。
6) coaxial
[英][kəu'æksiəl] [美][ko'æksɪəl]
同轴
1.
The band structure in microwave frequency for quasi-1-D coaxial photonic crystals;
用传输矩阵法研究微波波段准一维同轴光子晶体能隙结构
2.
Study on the Transmission Coefficient in Quasi one dimensional Coaxial Photonic Crystals;
准一维同轴光子晶体传输特性研究
3.
Experiment of single stage G-M coaxial pulse tube refrigerator;
单级G-M型同轴脉冲管制冷机实验
补充资料：高速气流-静电纺丝
分子式：
CAS号：
性质：为了提高熔(或溶)喷法和静电纺丝的生产效率和加速微纤化的进程，将两法组合起来而形成的新纺丝方法。聚合物的熔体或溶液同时受高速热气流和高静电压的电场力作用而迅速微纤化，并聚集于下方的移动电极接受网上，形成自黏合的超细纤维非织造物或毡片。为了加速溶剂的挥发使纤维固化，可设置红外线加热器，并安置吸风道以回收溶剂。
CAS号：
性质：为了提高熔(或溶)喷法和静电纺丝的生产效率和加速微纤化的进程，将两法组合起来而形成的新纺丝方法。聚合物的熔体或溶液同时受高速热气流和高静电压的电场力作用而迅速微纤化，并聚集于下方的移动电极接受网上，形成自黏合的超细纤维非织造物或毡片。为了加速溶剂的挥发使纤维固化，可设置红外线加热器，并安置吸风道以回收溶剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条