1) autechoscope
自检听诊器
2) autostethoscope
自检听诊器
3) self-test
自检
1.
Design of self-test electrode for tunneling-based gyroscope with vibrating cantilever;
基于隧道效应振动梁式陀螺仪自检电极设计
2.
To improve reliability of Fault Diagnosis Device for Large -scale Mechatronics Equipment, more consummate function of self-test is adding.
为了提高大型机电设备故障诊断装置诊断结果的可靠性,给诊断装置增加了较完善的自检功能。
4) self-testing
自检
1.
The self-testing of VILLA STRATO 2000 dental panoramic X-ray machine;
VILLA STRATO 2000口腔全景X光机自检故障
2.
In order to meet the requirements for high reliability of space camera controller,a self-testing method of Digital Signal Processor(DSP) space camera controller based on mixed language programming was proposed.
针对空间相机控制器的高可靠性要求,提出了一种基于混合编程的DSP空间相机控制器的自检方法。
5) self-checking
自检
1.
Based on the ping-pong type field grounding protection, it presents one-point-to-ground protection scheme by integrating the self-checking method of switches.
针对乒乓式励磁回路接地保护,结合开关自检方法提出了完整的一点接地保护方案;在两点接地保护方案中估算了开关切换过程中过渡电阻变化对接地点位置计算的影响,提出了故障位置偏差式两点接地的自适应判据,为了弥补该判据的缺陷,提出了结合二次谐波辅助判据的综合方案。
2.
This paper introduces some normal methods on RAM self-checking for single chip processor application system,and give a new way on RAM self-checking.
在各种单片机应用系统中,RAM与该应用系统的正常工作紧密相关,RAM的自检可有效地避免RAM不正常工作给系统带来的损害。
3.
This paper is based on the pingpong bridge field ground protection ,itpresents one point to ground protection scheme which include the self-checking method of switches.
本文针对乒乓式保护，结合开关自检方法提出了完整的一点接地保护方案：在两点接地保护方案中估算了开关切换过程中过渡电阻变化对接地点位置计算的影响，提出了故障位置偏差式两点接地的自适应判据，为了弥补该判据的缺陷，提出了结合二次谐波辅助判据的综合方案。
6) self-check
自检
1.
Realization & standardization of self-check function of microcomputer-based relaying prouducts;
微机型继电保护产品自检功能的实现与规范
2.
The design method of the self-check on the aeronautic fire control automatic test system is researched in this paper.
研究了在航空火控系统自动化检测系统中自检的设计方法。
3.
The shortcomings and difficulties in the unit self-check of a period of time system was discussed as well as the method apply multithreading theory and thread mutual exclusion theory in order to ensure the correctness on reading and writing.
主要讨论了早期系统中设备同时自检存在的缺点和困难,应用多线程理论及线程互斥理论实现系统中对各分机设备同时自检的功能,保证了数据读写的正确性,并对串口实现分布式系统开发的可扩充能力进行了简单论述。
7) self detecting
自检
1.
It has implemented the detecting,computing and displaying of airplane direction as well as the system calibration and self detecting etc.
该系统使用ＭＳＣ－５１单片机作为主处理器件并实现了飞机方位的检测、计算、显示以及系统的校准，自检等功
8) Self-checking
~+自检
9) self checking
自检
10) Self-Inspection
自检
补充资料：CPU自动检测
以前的老式主板需要用户自己设定CPU的外频，倍频以及电压等参数（一般都是通过跳线来设定），现在生产的主板都能自动检测到这些参数，进而正确设定这些参数，并保存在CMOS中。在CMOS掉电时，也不需要打开机箱重新进行设置。
另外，现在的主板还具有老式主板所没有的CPU温度检测报警功能。CPU温度过高会导致系统工作不稳定或者死机，甚至损坏CPU等，所以对CPU的温度检测是很重要的。它会在CPU温度超出安全范围时发出警告检测。温度的探头有两种：一种集成在处理器之中，依靠BIOS的支持；另一种是外置的，在主板上面可以见到，通常是一颗热敏电阻。它们都是通过温度的改变来改变自身的电阻值，让温度检测电路探测到电阻的改变，从而改变温度数值。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条