1) artificial graphite scrap
人造石墨碎块
2) chunky graphite
碎块状石墨
1.
According to stress of graphite austenite eutectic cell during solidification, the caues of chunky graphite of hot spot and some factors are analysed in this article.
本文从球墨铸铁石墨———奥氏体共晶团形成及长大过程中的应力出发 ,分析了大断面球铁热节处非球形石墨—碎块状石墨的形成原因及若干影响因素 ,提出了防止措施。
2.
The nesnlts show that St will fiercely promote the formation of chunky graphite when more than 2.
１％时，强烈促进碎块状石墨的形成，防止碎块状石墨的关键是减少Ｓｉ，使球铁碳当量不超过共晶碳当量。
3.
Presence of chunky graphite seems to be more of a problem in ferritic,high Si and austenitic ductile iron.
碎块状石墨(chunky graphite)是厚大断面球墨铸铁件常见的缺陷之一,尤其在铁素体球铁、高w(Si)量以及奥氏体球墨铸铁中较为严重,它会明显影响铸件的力学性能,应尽可能避免或控制。
3) artificial graphite
人造石墨
1.
Commercial mesocarbon micro beads(MCMB) and its mixture with artificial graphite were investigated as negative electrodes of polymer lithium ion batteries.
采用商品化中间相碳微球(MCMB)及人造石墨与中间相碳微球的混合体作为聚合物锂离子电池的负极材料,通过SEM、XRD对比研究了两种负极材料电化学循环前后的微观形貌和相结构,测试了两种聚合物锂离子电池的倍率放电性能和循环寿命,并通过交流阻抗谱分析了两种负极材料的电化学性能差异。
2.
Electrochemical intercalation characteristics of lithium ion in artificial graphite (AG) and the performances of AA size cell with it as the anode were studied in this paper.
研究了锂离子在人造石墨（ＡＧ）中的电化学嵌入特性和用它作负极材料时的电池性能。
3.
impedance spectroscopy measurement was applied to analyze Li+ diffusion in waste artificial graphite before and after coating modification and the effect of coating modification on Li+ diffusion coefficient in it was investigated.
为探究人造石墨包覆修饰处理对锂离子电池负极固相扩散系数的影响,弄清锂离子在包覆改性石墨中的传输扩散过程,采用交流阻抗测试技术对包覆修饰前后人造石墨中锂离子的扩散系数进行测试。
4) synthetic graphite
人造石墨
1.
The experimental results show that when adding synthetic graphite,every physical and chemical property of materials is prior to that which is added flake graphite and high temperature pitch.
结果表明:材料在引入人造石墨后各项理化性能指标优于鳞片石墨和高温沥青。
2.
Resin/graphite composite bipolar plate using poly(phenylene sulfide) and synthetic graphite was prepared by hot-pressure molding.
以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料。
5) cast stone
人造石块
6) scrap artificial graphite
废人造石墨
补充资料：人造石墨
分子式：
分子量：
CAS号：
性质：又称高温石墨。由无烟煤或焦炭在电炉中经热处理而制得的石墨。有滑腻感觉。断面呈银灰色。可用刀切割。不应含有未石墨化的无烟煤或焦炭杂质。用以代替天然石墨制石墨电极和胶体石墨制剂等。
分子量：
CAS号：
性质：又称高温石墨。由无烟煤或焦炭在电炉中经热处理而制得的石墨。有滑腻感觉。断面呈银灰色。可用刀切割。不应含有未石墨化的无烟煤或焦炭杂质。用以代替天然石墨制石墨电极和胶体石墨制剂等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条