1)  voids ratio
空穴系数
2)  void coefficient
空穴系数
3)  void coefficient
空穴系数<能>
4)  sodium coefficient
钠空穴系数
5)  sodium-void coefficient
钠空穴系数
6)  void coefficient of reactivity
反应性空穴系数
7)  void reactivity coefficient
反应性空穴系数
8)  Void
空穴
1.
Design method of reinforcement over voids and discussion;
空穴加筋的设计方法及讨论
2.
Furthermore,three ductile damage mechanisms were proposed,which are shear damage without the influence of voids, shear-form void damage and tensile form void damage.
以45中碳钢为研究对象,进行了拉伸、压缩、扭转、精冲实验,并结合有限元对各实验过程中的应力三轴度和延性损伤进行了分析,归纳了金属材料的3种延性损伤机理:无空穴影响剪切损伤、剪切型空穴损伤和拉伸型空穴损伤。
3.
The isolated big void behavior in the tension PM specimen has been ana lyzed by Gurson constitutive model.
讨论了不同位置和不同形状的微空洞对空穴形核、长大及材料的破坏机理的影响。
9)  hole
空穴
1.
Essential Explain on Holes——misunderstanding for the concept of holes in some electronic books can be dearified;
空穴的本质阐释——澄清一些电子学教材对空穴概念的不确切含义
2.
It was concluded that after hole-electron pairs were induced by ultraviolet light,the hole then oxidized methanol directly,forming methanol free radical cation,which would be further oxidized in the .
TiO2受光诱导生成空穴-电子对后,空穴直接氧化甲醇,生成的甲醇正离子在氧气作用下进一步被氧化,形成各种氧化产物。
3.
The hole-blocking characteristics of organic light emitting materials DPVBi were discussed.
讨论了有机发光材料4,4-′b is(2,2-′d iphenyl vinyl)-1,1-′b iphenyl(DPVB i),在结构为ITO/N,N-′b is-(1-naphthyl)-N,N-′d iphenyl-1,1-′b iphenyl-4,4-′d iam ine(NPB)/DPVB i/tris-(8-hydroxyqu inoline)alum inum(A lq3)/L iF/A l的有机电致发光器件中所表现出来的空穴阻挡特性。
10)  cavity
空穴
1.
Insulation effect of the cavity on stress wave;
空穴的绕射隔离效应和对后方应力波的削弱作用
2.
Study on Phenomenon of Negative Air Pressure of Cavity in Interfacial Medium with Tensile Test;
空穴负压现象的界面拉伸试验研究
3.
The relationship between the external load and the cavity radius was determined.
利用Gao Y C给出的一类应变能函数,在有限变形动力学的框架内分析了不可压缩均匀球体突受拉伸恒载作用时空穴的动态生成和分叉问题。
补充资料:质能转换系数
分子式:
CAS号:

性质:是对非荷电致电离粒子所定义的,以μ/ρ表示。μ/ρ= ,其中E是入 射粒子能量(包括剩余能量),N是入射粒子数目,dEtr/EN是在密度为ρ的物质中经过距离为dx,入射粒子通过相互作用转换的荷电离子的动能部分;这里相互作用包括作为次级电子的荷电粒子。单位为m2/kg。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条