1) field cured cylinders
现场圆柱型试件
2) round test bar
圆柱试件
1.
The basic principles of measuring theCOD resistance curve for a round test bar accordingto unloading compliance single specimen techniquesand the methods for acquiring and processing datawith microcomputer were introduced.
介绍降载柔度单试件法测量柱试件ＣＯＤ阻力曲线的基本原理和运用微机采集与处理数据的方法，测定圆柱试件ＨＱ６０钢的ＣＯＤ阻力曲线，试验结果表明用降载柔度法测量圆柱试件ＣＯＤ阻力曲线有很高精度。
3) test piece molding at spot
试件现场成型
5) short round bar
短圆柱试件
6) cylinder specimen
圆柱形试件
补充资料：55°圆柱管螺纹的型式和尺寸
| 螺纹代号 | 基本尺寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 底孔尺寸 mm | |
| G 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 8.7 | |
| G 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 11.6 | |
| G 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.95 | 0.856 | 15 | |
| G 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 19 | |
| G 5/8 | 5/8＂ | 22.911 | 1.814 | 14 | 21.749 | 20.587 | 1.162 | 20.75 | |
| G 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 24.5 | |
| G 7/8 | 7/8＂ | 30.201 | 1.814 | 14 | 29.039 | 27.877 | 1.162 | 28 | |
| G 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 30.5 | |
| G 1 1/8 | 1 1/8＂ | 37.897 | 2.309 | 11 | 36.418 | 34.939 | 1.479 | 35 | |
| G 1 1/4 | 1 1/4＂ | 41.91 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 39.5 | |
| G 1 3/8 | 1 3/8＂ | 44.323 | 2.309 | 11 | 42.844 | 41.365 | 1.479 | 41.5 | |
| G 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 45 | |
| G 1 3/4 | 1 3/4＂ | 53.746 | 2.309 | 11 | 52.267 | 50.788 | 1.479 | 51 | |
| G 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 57 | |
| G 2 1/4 | 2 1/4＂ | 65.71 | 2.309 | 11 | 64.231 | 62.752 | 1.479 | 63 | |
| G 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 72.5 | |
| G 2 3/4 | 2 3/4＂ | 81.534 | 2.309 | 11 | 80.055 | 78.576 | 1.479 | 79 | |
| G 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 85.5 | |
| G 3 1/4 | 3 1/4＂ | 93.98 | 2.309 | 11 | 92.501 | 91.022 | 1.479 | 91 | |
| G 3 1/2 | 3 1/2＂ | 100.33 | 2.309 | 11 | 98.351 | 97.372 | 1.479 | 97.75 | |
| G 3 3/4 | 3 3/4＂ | 106.68 | 2.309 | 11 | 105.201 | 103.722 | 1.479 | 104 | |
| G 4 | 4＂ | 113.03 | 2.309 | 11 | 111.55 | 110.072 | 1.479 | 110.5 | |
| G 4 1/2 | 4 1/2＂ | 125.73 | 2.309 | 11 | 124.251 | 122.772 | 1.479 | 123 | |
| G 5 | 5＂ | 138.43 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 136 | |
| G 5 1/2 | 5 1/2＂ | 151.13 | 2.309 | 11 | 149.651 | 148.172 | 1.479 | 148.5 | |
| G 6 | 6＂ | 163.83 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条