1) balanced gate
平横闸门
2) horizontal pulled gate
横拉闸门
3) balance flash_loc
平衡闸门
1.
It can speedily open and close the flash_locks,increase the ability of the hoisting,and shorten the maintaining time with the safe circumstances that the cylinder stator in structure of the balance flash_locks is rebuilded from the side of shaft to the side of non_shaft.
计量仓的开闭机构 ,由气缸设在井筒侧 ,改造成气缸设在非井筒侧的平衡闸门机构。
4) plate gate
平板闸门
1.
Based-on the deep plate gate on outlet tunnel of a hydroelectric station,the hydro-elastic plate gate model is developed based on the hydro-elastic simulation principles to test the vibration response under the condition of gate with different opening degree.
以某水电站泄洪洞平板闸门为实例,依据水弹性模拟原理研制了水弹性模型,对平板闸门不同开度工况的流激振动响应进行了测试;提出用三维板壳单元建立闸门空间数学模型,以测得的面脉动荷载为动荷载输入进行了流激振动响应计算;并将两种模型所得的结果进行了相互验证,并联合物理模型和数学模型对其动力响应特性进行了预测,对该闸门的动力安全进行了分析,提供不利于闸门振动的开度范围,为该闸门设计与安全运行提供重要参考依据。
5) flat gate
平面闸门
1.
Comparison between several modeling methods in finite element analysis of the flat gate beam;
平面闸门主梁有限元分析的几种建模方法比较
2.
In this paper, the anthor analyzed the drawing feature of hydro engineering and metal structure, and expounded the flat gate variable drawing software on Auto CAD.
本文分析了水工金属结构的绘图特点,阐明了在AutoCAD平台上所开发的平面闸门参数化绘图软件。
6) plane gate
平面闸门
1.
Study on the free vibration characteristics of liquid-solid coupling of plane gate;
平面闸门流固耦合自振特性研究
2.
Hoisting and installing plane gates under special conditions;
一种特殊条件的平面闸门吊装
3.
In this paper,the software ANSYS is applied to study in detail the self-vibration characteristics of long-span plane gate with consideration of the effect of fluid-structure coupling against the background of sluices dynamic problems in the southwestern China.
以西南水闸的动力学问题为背景,考虑水体对闸门自振特性的影响,应用ANSYS软件对大跨度平面闸门的自振特性进行了详细的分析研究。
补充资料：横拉闸门
横拉闸门
horizontal drawing gate
hengla zhamen横拉闸门(horizontal drawing gate)平面门叶沿水平轨道左右移动而启闭孔口的闸门(见图)。只能在静水条件下启闭，适于船闸、船坞采用。门叶的竖向剖面有矩形和梯形二种，前者用得比较普遍。门叶结构有横梁式和竖梁式二种，一般采用横梁式。门叶两侧端架上设有竖向条形支承座，当闸门关闭时，它与埋在坛工结构内的支承座相贴合，以承受水压力。当闸门开放时，「」叶全部移入门库。大型横拉闸门为减轻门叶在水中横拉!间「J的重量，降低滚轮轮压和启闭力，有时在最低通航水位以下的横梁间设置浮箱，其布置要考虑到门叶重心变化对滚轮轮压和门叶的抗倾稳定性。此外，横拉闸门的门库和门坑常受到淤泥沉积的影响，必须考虑水下检修滚轮的方便性。(夏念凌)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条