1)  cast iron belt pulley
铸铁皮带轮
2)  grey iron belt pully
灰铸铁皮带轮
3)  cast iron
铸铁
1.
Effect of the sensitization-activation on the performance of the Ni-P electroless plating on the surface of cast iron;
敏活化处理对铸铁表面Ni-P化学镀层性能的影响
2.
Microstructure of Fe-Cr-Si-B coating prepared by plasma cladding on cast iron;
铸铁表面等离子熔覆Fe-Cr-Si-B涂层的组织特征
3.
Microstructure and mechanical property of cast iron spray-welding;
铸铁喷焊组织及力学性能
4)  Casting Iron
铸铁
1.
Application of Nano-materials in Cermet Cutting Tools for Casting Iron;
纳米材料在切削铸铁刀具中的应用
2.
The use of BP artificial neural networks in the production of a kind of casting iron;
BP人工神经网络在一种铸铁生产上的应用
3.
Vital meaning of materials gained attentions in cutting tools for casting iron and influential factors for tool selection in cutting casting iron are introduced.
介绍了选择铸铁切削用刀具需考虑的因素,可用于不同牌号铸铁的切削用刀具新材料有硬质合金刀具、陶瓷刀具、金属陶瓷刀具和超硬刀具。
5)  cast irons
铸铁
1.
The heredity of cast irons includes conservation of structure information, composition heredity effect and conservation of physical properties features.
铸铁的遗传性包含结构信息保留、成分遗传效应和物性特征保存。
2.
The history of application of rare earth to cast irons has been of more than 50 years in the world,and also more than 40 years in China.
稀土在铸铁中应用已有50多年历史,中国的应用史亦已超过40年。
3.
Some problems in production of cast irons with chromium addition was described including; effects of chromium addition, determination of chromium addition amount, chromium adding method and some points for attention.
介绍了加铬铸铁生产中加铬的作用、合适的加入量、加入方式和注意事项等。
6)  iron
铸铁
1.
Finite element simulation of thermal stress on the brazed TiC cermet/iron joint;
TiC金属陶瓷/铸铁钎焊接头热应力的有限元模拟
2.
In this paper,we research the influence of the ratio of Si/C on iron s strength,elasticity modulus and hardness in cupola s melting.
在冲天炉熔炼条件下 ,研究了SI/C值对灰铸铁抗拉强度 ,弹性模量和硬度等铸铁质量的影响 。
3.
The adhesive forces betwenn V T i iron and ductile iron have been measured in Ultra High Vaccum adhesion equipment in situs The surface temperature of iron under the equalibrilum state is calculated.
在超高真空粘附装置内原位测定钒钛铸铁、球墨铸铁的粘附力,计算铸铁表面滑动接触时的表面温度,实验发现,粘附力随温度升高而下降。
7)  Cast-iron
铸铁
1.
Inhibit behavior about phosphate-molybdate system on the cast-aluminium and the cast-iron in the neutral water;
中性水中铸铁和铸铝的缓蚀行为研究
2.
The refractory of induction channel furnaces for cast-iron holding;
有心感应铸铁保温炉耐火材料
8)  casting pig
铸铁
9)  CI
铸铁
10)  wrought iron
铸铁
补充资料:灰铸铁
分子式:
分子量:
CAS号:

性质:含有片状石墨的铸铁。断口呈深灰色。具有优良的铸造、切削加工、抗磨、滑润、消振等性能,但强度较差,不能锻轧。常用在化工机械制造中。代号HT(huitie的缩写),加以最低抗拉强度σb及抗弯强度σw的数值。例如HT18-36,即表示σb≥176.4兆帕(18公斤力/毫米2),σw≥356.8I兆帕(36公斤力/毫米2)的铸铁。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条