1) polyvinyl chloroacetate
聚氯醋酸乙烯酯
2) polyvinyl chloride acetate
聚氯醋酸乙烯酯
3) PVC
聚氯乙烯
1.
Research progress of PVC/montmorillonite nanocomposites;
聚氯乙烯/蒙脱土纳米复合材料研究进展
2.
The power distribution design for the production field of PVC;
聚氯乙烯生产现场的配电设计
3.
Pyrolysis Characteristics of Medical Waste Compositions Containing PVC(Polyvinyl Chloride);
聚氯乙烯(PVC)类医疗废物的热解特性研究
4) poly(vinyl chloride)
聚氯乙烯
1.
Synthesis of methyl methacrylate-butadiene-styrene resin and its modification to poly(vinyl chloride);
甲基丙烯酸甲酯-丁二烯-苯乙烯树脂的合成及其对聚氯乙烯的改性
2.
Structure and properties of acrylonitrile-butadiene rubber/poly(vinyl chloride)/hindered phenol AO-60 blends;
丁腈橡胶/聚氯乙烯/受阻酚AO-60共混物的结构与性能
3.
ZnO and metal hydroxides as flame-retardants and smoke suppressants for flexible poly(vinyl chloride);
氧化锌和氢氧化物对软聚氯乙烯阻燃性能的影响
5) cyanuric chloride
三聚氯氰
1.
Synthesis of a 1,3,5-triazin Derivative by cyanuric chloride and hexane-1,6-diamine;
用三聚氯氰和己二胺合成均三嗪衍生物的研究
2.
Progress in the study of active monomers and polymers prepared from cyanuric chloride;
三聚氯氰在活性单体及聚合物合成中的应用研究进展
3.
A Study in Material Selection and Failure Mechanism for Cyanuric Chloride Plant Polymerization Reactor;
三聚氯氰装置聚合反应器的材料选择及失效机理研究
6) poly (vinyl chloride)
聚氯乙烯
1.
A kind of anti-ageing plastic composed of acrylonitrile-butadiene-styrene (ABS)/poly (vinyl chloride) (PVC) was developed with taking ABS, PVC as major raw materials, and taking antioxidants and ultraviolet (UV) absorbers as additives The processing, mechanical and anti-ageing properties of the plastic were also studied.
以国产丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)、聚氯乙烯(PVC)为主要原料,配以紫外线吸收剂、抗氧剂等助剂。
2.
A kind of methyl methacrylate-grafted acrylonitrile-butadiene-styrene copolymer (Blendex 338, Blendex) was used to toughen poly (vinyl chloride)/organophilic montmorillonite (PVC/OMMT) composites.
选用一种甲基丙烯酸甲酯 -丙烯腈 -丁二烯 -苯乙烯四元共聚物 (BLENDEX 338,简称Blendex)对聚氯乙烯 /有机蒙脱土 (PVC/OMMT )复合材料进行增韧改性。
3.
This paper introduced the advances worldwide in styrene - maleic anhydride (SMA)/ poly (vinyl chloride) (PVC) alloys and listed the recipes and processing technologies of the SMA/PVC alloys reported in the references.
介绍了国内外苯乙烯-马来酸酐无规共聚物(SMA)/聚氯乙烯(PVC)合金的研究进展,列举了文献报道的SMA/PVC合金配方、加工方式,并以图示的方式阐述了合金的耐热性,阻燃性、加工性与SMA含量的关系用国产SMA制备SMA/PVC合金,表明SMA不仅能起耐热作用,而且能缩短PVC塑化时间;对制样方法研究后表明:双辊开炼工艺制得的试样力学性能比注塑的好。
7) Polyvinyl chloride
聚氯乙稀
1.
The nitrile rubber(NBR)/polyvinyl chloride(PVC)/organomontmorillonite(OMMT) nanomposites were prepared by using latex co-precipitation technique and direct mixing technique.
采用胶乳共沉法和直接共混法制备了丁腈橡胶/聚氯乙稀/有机蒙脱土(NBR/PVC/OMMT)纳米复合材料。
2.
The chlorine behavior and dechlorination characteristics of polyvinyl chloride (PVC) and their influencing factors in thermal process were qualitatively and quantitatively studied by means of thermogravimetric and Fourier transform infrared spectrum (TG-FTIR) techniques as well as tubular electric oven system.
采用热重-傅立叶变换红外光谱仪(TG-FTIR)和管式炉系统等手段,对聚氯乙稀(PVC)热处理过程氯释放特性进行了定性和定量分析,研究了PVC中氯在热处理过程中的行为及其影响因素。
8) polyaluminum chloride
聚氯化铝
1.
Research on rapid separation technology of insoluble matters in polyaluminum chloride solution;
聚氯化铝溶液中不溶物快速分离技术研究
2.
The coagulation-flocculation and sedimentation beaker test and productive test were conducted to compare the flocculating and sedimentation effects of aluminium sulfate and several polyaluminum chloride(PAC) liquids.
通过混凝沉淀烧杯试验和水厂生产性试验,对硫酸铝(AS)和几种聚氯化铝(PAC)进行了优选,最终确定由深圳中润水工业技术发展有限公司提供技术、太仓新星轻工助剂厂生产的ZR-3型聚氯化铝的混凝沉淀效果最佳。
3.
Three series of polyaluminum chloride with aluminum concentration 2.
336 mol/L),合计32个聚氯化铝(PAC),并进行了透射电镜研究。
9) PVC
聚氯乙烯:
10) Polyaluminium chloride
聚氯化铝
1.
[Objective]To establish the method to determine lead in Polyaluminium chloride by flame atomic absorption spectrophotometry.
[目的]建立火焰原子吸收分光光度法测定聚氯化铝中铅的方法。
2.
During the polyaluminium chloride(PAC) flocculant experiment,using the fly ash as the material,we learned the skill of the fly ash pretreatment.
在利用粉煤灰作为原料制备聚氯化铝(PAC)絮凝剂实验过程中,重点研究粉煤灰的预处理工艺。
补充资料：聚氯乙烯
| 聚氯乙烯 polyvinyl chloride n 氯乙烯的聚合物。英文缩写PVC。结构为  聚氯乙烯是仅次 于聚乙烯 的第二大塑料品种 。 玻璃化温度80～85℃，密度 1.35～1.45 克／厘米，使用温度 － 15 ～ 60℃。PVC具有优良的耐酸碱、耐磨 、耐燃及绝缘性能，与大多数增塑剂的混合性好，因此可大幅度改变材料的力学性能 。 加工性能优良 ， 价格便宜 ， 但对光、热稳定性差 ，100℃以上或光照下性能迅速下降。聚氯乙烯用自由基加成聚合制备，方法有悬浮、本体、乳液和溶液等，其中以悬浮法为主，以过氧化物、偶氮导腈类引发，加分散剂后可得到疏松树脂颗粒，加工性能好。聚合温度高，链转移速率高，产物分子量小，一般应稳定在±0.5℃以内。 溶液聚合产物直接用作涂料胶粘剂，乳液聚合产物也可直接应用，或喷雾干燥为固体。 常用挤出注射方法成型 。高分子量树 脂力学性能好，加塑剂后制成软质制品，主要用于薄膜、包装材料、容器、电线；低分子量树脂容易加工，适合于硬质制品，用于管、板、下水道和建筑材料。氯乙烯-醋酸乙烯酯共聚物流动性好，加工温度低，用于唱片、地板、涂料。氯乙烯 - 丙烯腈共聚物的软化温度、强度较高，并改善溶解性，宜作纤维；氯乙烯-丙烯酸酯类共聚物的耐候性、冲击性有所提高。氯乙烯 - 丙烯共聚物的流动性和热稳定性较好，可作瓶料。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条