1) wear strip
磨损补偿垫板条
2) abrasion compensation
磨损补偿
1.
It also expatiated the meanings of roads’ abrasion and proposed abrasion compensation modes accordingly in addition to the actual things.
本文从经济学角度出发,分析了高速公路的准公共产品特性和高速公路的产权归属,阐述了道路磨损的含义,并根据道路的磨损情况提出了相应的道路磨损补偿方式。
3) wear self-compensation
磨损自补偿
1.
The wear self-compensation additives ES12 and ESM122 are developed.
研制出磨损自补偿添加剂ES12、ESM122,系统研究了其在5种成品油中的摩擦学性能。
4) wear-self-compensation
磨损自补偿
1.
According to the theory of wear-self-compensation and aiming at the popular wear problems and serious results of mechanical engineering and products, additives ZSA and ZSC were developed to provide excellent wear-self-compensation tribological effect for tin bronze/hard chromium-plated 45 steel rubbing pairs in hydraulic pressure oil.
从磨损自补偿理论出发,针对工程上磨损问题突出、易造成严重后果的机械产品,成功研制了在液压油中对锡青铜-镀硬铬45钢摩擦副具有优异的磨损自补偿摩擦学效应的添加剂ZSA和ZSC。
2.
Additive ES12 was developed as wear-self-compensation, and the self-compensation effects and tribological effects of steel 45-steel 45 rubbing pairs and steel- 45-tin bronze rubbing pairs were studied.
研制了磨损自补偿润滑添加剂ES12 ,并对 4 5钢 4 5钢摩擦副及 4 5钢 锡青铜摩擦副的磨损自补偿效应和摩擦学效应进行了研究。
5) wear-self-compensation additive
磨损自补偿剂
1.
Aiming at the gear-driven steel-steel friction pair of the rolling mill grinding device,the influences of the wear-self-compensation additive SW4 developed by ourselves on the lubricating oil load-bearing capacity and the friction and wear characteristic of the steel-steel friction pair were studied.
结果表明:磨损自补偿剂SW4加入所试验的4种润滑油中,都不同程度地提高钢-钢摩擦副的最大无卡咬负荷和烧结负荷,其中最大无卡咬负荷提高程度较大;同时钢-钢摩擦副的耐磨性也有很大的提高。
6) wear self-compensation membrane
磨损自补偿膜
1.
The result shows that the water is advantageous for self-compensation lubricating oil to form wear self-compensation membrane on the friction surface,a.
结果表明:水有利于自补偿润滑油在摩擦表面形成磨损自补偿膜,提高其补偿率;以自补偿润滑油代替常规润滑油是非常好的耐磨措施。
补充资料：表面磨损
分子式：
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条