1)  high temperature alloy
耐高温合金
2)  High-temperature alloy
耐高温合金
3)  High temperature alloys
耐高温合金钢
4)  high temperature resistant
耐高温
1.
The research and development of monofilaments for high temperature resistant filter medium;
耐高温滤用单丝的研究进展
2.
Study on an advanced high temperature resistant coating with nano-filler;
新型耐高温纳米防护涂料研究
3.
It also gives a discussion about the mechanism, technical proposal and development of a high temperature resistant optical fiber used in well logging.
介绍了国外光纤测井技术的发展概况,对测井光纤光缆的环境性能要求,论述了测井用耐高温光纤的机理,耐高温光纤的技术方案以及国外开发耐高温光纤的情况。
5)  high-temperature resistance
耐高温性
1.
In order to improve the high-temperature resistance of bismuth vanadate yellow pigment,it was coated with SiO2 through hydrolysis reaction of tetraethoxysilane(TEOS).
为了提高钒酸铋(BiVO4)黄色颜料的耐高温性,利用正硅酸乙酯(TEOS)的水解反应,在BiVO4表面形成SiO2膜,使钒酸铋黄色颜料经过1 000℃的高温煅烧,依然颜色鲜艳。
2.
The evaluation methods of adhesion,compactness and high-temperature resistance of unsaturated polyester putty are discussed.
讨论了原子灰附着性、致密性、耐高温性的评价方法;介绍了原子灰的正确选择和施工应用。
3.
The high-temperature resistance of a phenolic molding compound based on a phenolic resin reinforced with glass fiber was studied.
采用一种自制的苯酚甲醛树脂和复合固化体系 ,以无机玻璃纤维为增强材料 ,得到一种可注射成型的酚醛模塑料 ,对其耐高温性能进行了研究。
6)  heat-resistant
耐高温
1.
Screening of fungi producing heat-resistant lassase;
一株产耐高温漆酶真菌的筛选
2.
But polysulfide rubber is not used in modification epoxy resin heat-resistant constructional adhesive curing at room temperature,because it is bad in heat-resistant property.
目前室温固化耐高温环氧树脂结构胶粘剂主要采用液体端羧基丁腈橡胶增韧环氧树脂为主体,以改性液体端胺基丁腈橡胶或聚醚胺为韧性固化剂,其最高使用温度仅120℃。
3.
A heat-resistant and anti-corrosive coating has been developed for use in marine environments.
研制了一种耐高温的防腐蚀涂料。
7)  high-temperature resistance
耐高温
1.
Development of research on high-temperature resistance thermosetting resin adhesives;
耐高温热固性树脂胶粘剂的研究动态
2.
Study on room cured high-temperature resistance WD3102 epoxy adhesives;
WD3102室温固化耐高温胶粘剂的研制
3.
To measure the formation parameters in the high-deep and high-temperature oilwells and improve the high-temperature resistance performances of logging tools,the paper analyses the technologies of isolating heat and absorbing heat to increase the logging tools' high-temperature resistance performances.
为实现大深度井、高温井的地层参数测量,提高测井仪器的耐高温性能,研究了隔热、吸热技术在提高石油测井仪器的耐高温性能方面的作用。
8)  high temperature resistance
耐高温
1.
Advances in high temperature resistance organic adhesives;
耐高温有机胶粘剂研究进展
2.
Sticking technology of high temperature resistance fluoro-aether rubber;
耐高温氟醚橡胶粘接工艺研究
3.
Study on high temperature resistance adhesive for room temperature curing;
室温固化耐高温胶粘剂的研究
9)  high temperature resistance
耐高温性
10)  high-heat-resistant
耐高热
1.
Study on the recipe of high-heat-resistant conveyer belt;
EPDM/CM耐高热输送带覆盖胶配方探讨
补充资料:铂改性铝涂层IN738LC耐蚀高温合金热腐蚀产物


铂改性铝涂层IN738LC耐蚀高温合金热腐蚀产物


  IIL_一_一了
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条