1) grease extractor
油脂抽出器
2) grease extractor
滑脂抽出器
3) extract oil
抽出油
1.
In order to fabricate rubber packing oil satisfied with some standards,extract oil,a byproduct during solvent refining of lubricating oil,was refined using N-methyl-2-pyrrolidone(NMP).
为了研制符合一定标准的橡胶填充油,以N-甲基吡咯烷酮(NMP)为溶剂对润滑油溶剂精制过程中的副产物抽出油进行抽提。
2.
A rubber filling oil was prepared by extracting a extract oil using furfural as solvent, where the extract oil was from the equipment of refining lubricant oil by solvent.
以糠醛为溶剂对抚顺石油一厂减五线馏分油溶剂精制的抽出油进行抽提,制备了橡胶填充油。
3.
The development and application of furfural extract oil produced by Ji'nan Refinery in rubber industry are mainly presented.
主要介绍济南分公司的糠醛抽出油在橡胶工业方面的开发和应用情况。
4) extracted oil
抽出油
1.
The aromatics separation process route with double-solvent extraction for straight-run extracted oil in lube oil refining process has been proposed.
提出了润滑油精制过程直馏抽出油烈溶剂抽提的芳烃分离工艺路线。
2.
With concoction of residuum extracted oil with propane deoiled asphalt, HTPA were produced in agreement w.
采用酚精炼残渣抽出油和丙烷脱油沥青两组分调合方案,生产出符合国标GB/T15180的重交沥青产品,但作为调合组分的残渣抽出油产量有限,有时还会受到公司润滑油生产方案的限制,一定程度上限制了重交沥青的生产发展。
5) extraction oil
抽出油
1.
The paper introduced the experiment process and the result of producing r oad asphalt by solvent de -waxing of furfural extraction oil.
介绍了南阳炼油厂对正序抽出油进行溶剂脱蜡作道路沥青调合组分生产道路沥青的实验过程和结果,并对其经济效益和社会效益进行了分析。
6) furfural extract oil
糠醛抽出油
1.
A kind of surfactant KOCS was prepared by sulfonation of furfural extract oil.
以糠醛抽出油为原料,通过磺化制备了一种表面活性剂KOCS。
2.
Using the hydrodewaxing process and the furfural extract oil from reduced-pressure route Ⅱ as feedstock, we obtained the desired 310℃ heat transfer oil with selected catalysts and under suitable processing conditions.
以减二线糠醛抽出油为原料,采用临氢降凝工艺,在选择的催化剂和适宜工艺条件下,可以生产出符合指标要求的310℃导热油,其性能优越。
3.
The application status of furfural extract oil is introduced.
介绍了糠醛抽出油的使用现状,结合克拉玛依石化公司糠醛抽出油的实际生产情况,重点分析了常三线、减二线糠醛抽出油的特性——单环芳烃和双环芳烃理想组分含量较高,但硫化物、氮化物等非理想组分含量也很高。
补充资料：抽出油
分子式：
CAS号：
性质：石油馏分溶剂精制的抽出液经脱除溶剂后的油。由重整油加工得到的抽出油主要含C6～C8芳烃，经分离后可得纯度高的单组分芳烃。由润滑油加工得到的抽出油主要成分为多环芳烃。
CAS号：
性质：石油馏分溶剂精制的抽出液经脱除溶剂后的油。由重整油加工得到的抽出油主要含C6～C8芳烃，经分离后可得纯度高的单组分芳烃。由润滑油加工得到的抽出油主要成分为多环芳烃。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条