1) flame temperature
火焰温度着火温度
2) flame temperature
火焰温度
1.
A novel device for measuring pulse flame temperature and water vapor concentration;
脉冲火焰温度及水蒸气浓度测量装置研究
2.
Research on the data processing method of the luminous flame temperature;
一种测量发光火焰温度的数据处理方法研究
3.
An Improved Two-color Method Measurement System for Local Transient Soot Concentration and Flame Temperature in the Cylinder of Diesel Engines;
柴油机气缸内局部瞬态碳粒浓度、火焰温度改进双色法测量系统
3) Flame/temperature
火焰/温度
4) ignition temperature
着火温度
1.
KCl and NaCl on ignition temperature,combustion characteristics and area of heat liberation of high ash coal (HAC) is investigated by thermogrametric analysis.
用热重分析方法对比研究了Ca(NO_3)_2,KCl和NaCl对高灰分煤(HAC)着火温度、燃烧特性指数和放热面积的影响。
2.
The effect of different catalysts on the slime ignition temperature,burning completely temperature,and area of heating value are compared,The results show that catalysts can decrease the ignition temperature and burning completely temperature,increase the quantity of heat releasing during combustion,and the catalytic effect of the TF catalyst is better than KNO 3 catalyst.
对比研究了硝酸钾催化剂及 TF配方助燃催化剂对兖州煤泥着火温度、燃尽温度和放热面积的影响 。
3.
5% in a slurrying process, the ignition temperature of coal is reduced from 582℃ to 576℃ and the burnout efficiency of fixed carbon is promoted from 91.
用热重法研究了不同条件下电石渣的催化煤燃烧特性,发现电石渣对晋城煤的着火温度和固定碳燃尽率都具有一定的促进作用,而且随添加量的增加助燃作用增强。
5) igniting temperature
着火温度
1.
Optimized BP network model for predicting igniting temperature of pulverized-coal based on genetic algorithm;
基于遗传算法优化的煤粉着火温度BP神经网络预测模型
2.
Test study on electrio omagnetic type oilless ignition burner has been carried out under condition of maintaining same air velocity and same walltemperature, the influence of different pulverized coal concentration in air flow upon igniting temperature, igniting distance, igniting heat, and igniting mode being analysed, and the igniting mechanism being approached.
在保持相同风速与壁温的条件下对电磁感应无油点火燃烧器进行了试验研究 ,分析了不同煤粉气流浓度对着火温度、着火距离、着火热以及着火方式的影响 ,并对其着火机理进行了探讨。
3.
The igniting of 100 MW CFB boiler is researched,including the igniting condition,the calculation of stable ,igniting temperature,the analysis of igniting process.
结合100MWCFB锅炉的冷态点火,对CFB锅炉的点火要求进行了介绍,对不同煤种着火温度的判断提出了计算方法,对实际点火过程进行了分析。
6) flame temperature field
火焰温度场
1.
The paper is to present the authors' study on the fire- flame behavior of the small-sized oil boilover fire with its focus on the analysis of the likely reasons and causes that may lead to such fires by using infrared thermo-imaging technology for the flame temperature field mutation.
采用红外热像仪对小尺度油罐油品扬沸火灾火焰温度场和火焰高度突变现象进行了实时研究,分析了火焰温度场突变的原因和火焰突变高度与油罐直径的关系。
2.
Charge coupled device(CCD) image technique is widely used in the flame temperature field measurements.
电荷耦合器件(charge coupled device,CCD)成像技术在火焰温度场测量中有广泛的应用,讨论基于CCD测量火焰温度场的反演计算误差。
补充资料：火焰温度
分子式：
CAS号：
性质：由于火焰各部位气体组成不同，燃烧反应进行程度不同，发热不同，散热不同，故温度各不相同。火焰温度通常指燃料与空气比例最适宜、混合及燃烧完全部位的最高温度，或指火焰高温部位的平均温度。
CAS号：
性质：由于火焰各部位气体组成不同，燃烧反应进行程度不同，发热不同，散热不同，故温度各不相同。火焰温度通常指燃料与空气比例最适宜、混合及燃烧完全部位的最高温度，或指火焰高温部位的平均温度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条