说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 艇布置图
1)  boat stowage plan
艇布置图
2)  boat arrangement
救生艇布置图
3)  boat arrangement
艇布置
4)  the general arrangement of ship
舰艇总体布置
5)  ship minelaying mechanism
舰艇布雷装置
6)  general layout
总图布置
1.
This paper retrospects the history of the general layout design of Masteel new developing area,expounds the feature of the general layout design, summarizes the gain and loss of the general layout design, and puts forward some pertinent advice.
回顾了马钢新区总图布置的过程,阐述了总图布置的特点,总结了总图布置的一些得失,并提出了针对性的建议。
2.
The importance of general layout in construction of iron and steel business is analyzed.
分析了在钢铁企业建设中总图布置的重要性,根据邯钢燃气蒸汽联合循环发电厂的工艺需要并结合邯钢现状,在发电厂的建设中进行了总图布置优化。
3.
This paper describes general layout of the steel works and presents some constructive suggestions about the reconstruction of the existing steel works in our country from three aspects,the reasonable choice of construction position in the case of the effective use of two kinds of resources,concerning the full use of the equipment facilities and conditions to select the .
从有效利用“两种资源”,合理选择建设位置;从充分利用现有生产设施和条件,合理选择建设地点;从生产工艺流程和未来生产发展,合理确定平面布置三个方面,阐述了首钢迁安钢铁厂建设的总图布置,并对我国现阶段现有钢铁厂改造,提出了建设意见。
补充资料:ANSYS SOLID65环向布置钢筋的例子

 ANSYS SOLID65环向布置钢筋的例子
! 一个管道,环向配筋率为1%,纵向配筋率为0.5%,径向配筋率为0.1%
! 作者: 陆新征 清华大学土木系
!
FINISH
/CLEAR


/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1:不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,


!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,


! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2


! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL


ESIZE,500,0,
! 注意:设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意:红色代表最大配筋方向,绿色代表其次,蓝色表示最小配筋方向

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条