1)  method of successive comparison
逐次比较法
2)  successive approximation
逐次比较法
3)  sequential
逐次
1.
The relations of sensitivity among state variables, measured and estimated values of voltage and power are analyzed, and then a sequential tracking stated estimation method based on sensitivity analysis is proposed.
对状态量、量测量以及功率估计量之间的灵敏度关系进行了分析,进而提出了基于灵敏度分析的逐次追踪状态估计。
4)  stepwise regression
逐次回归
1.
In this paper, based on the uniform design principle, an abrasive wear test of Ti-Al coating produced by supersonic arc spraying was conducted, and a stepwise regression analysis was made.
基于均匀设计试验设计方法,进行了超音速电弧喷涂Ti-Al 涂层磨粒磨损试验,在对试验结果进行逐次回归分析的基础上,系统并定量的研究了涂层耐磨性能随着喷涂工艺参数的变化规律,得到了优化后的最佳喷涂工艺参数。
5)  Progressive forming
逐次成形
6)  gradual approach
逐次逼近
1.
In order to eliminate systemic error caused by different times, different labs, different analysis methods, and to solve some problems in merging maps, we propose a map adjustment theory and gradual approach method, based on a hypothesis that there are same means and standard deviate of data in adjacent small areas between maps.
针对区域地球化学中因不同时间、不同实验室、不同分析手段等原因存在于各图幅数据的系统偏差而造成的图边拼接问题,提出了抑制图幅间数据系统误差影响的图幅平差思想,阐述了图幅平差的数学原理及逐次逼近平差方法。
2.
By means of constructional iterative equationthis paper presents a way to give out the existence and singularity of a type of e- quational root with gradual approach method.
本文通过构造迭代函数,利用逐次逼近的方法给出了一类方程根的存在性与唯一性的判断的一种解决方案。
3.
Kepler s equations can be solved with the gradual approach, which can be further extended to the solution of the non-linear equations.
求解开普勒方程可用逐次逼近法 ,这种方法还可推广到非线性方程的求解问题中。
7)  sequential tracing
逐次追踪
8)  successive approximation
逐次逼近
1.
Capacitor self-calibration technique used in time-interleaved successive approximation ADC;
时间交叉存取逐次逼近型ADC中的电容自校准技术(英文)
2.
SDP with successive approximation and its application in the operation of multireservoir system;
逐次逼近随机动态规划及库群优化调度
3.
According to IEEE standard for short time disturbance of power quality,a fast successive approximation classification method is developed.
针对电力短时扰动信号具有非平稳、突发性的特点,应用小波变换的多分辨率分析特性检测扰动信号的特征参量,依据IEEE制定的短时电能质量扰动标准,提出了一种逐次逼近型的快速分类法。
9)  successive integral
逐次积分
1.
Throush the interlace series type linear differential equation,coefficient containing three negative number of times,power function and arrangement number can be changed into the linear differential equation of successive integral.
通过把系数含有负三次幂函数与排列数的交错级数型线性微分方程化为可逐次积分的线性微分方程,找出了求这类方程通解的方法与理论,把所得定理给出了严格的证明,并将其推广,同时通过实例介绍了它的应用。
2.
Pass linear differential equation xy~((n))+ny~((n-1))=f(x) change into the linear differential equation of successive integral has been found witty the form that untied,have gicen strict proof,and to popularize it gets to know xy~((n))+(x+n)y~((n-1))+(n-1)y~((n)-2)=f(x) to untie.
通过把线性微分方程xy(n)+ny(n-1)=f(x)化为可逐次积分的线性微分方程,找出了它通解的形式,给出了严格的证明,并将它推广,得到xy(n)+(x+n)y(n-1)+(n-1)y(n-2)=f(x)的通解。
3.
By transforming the interlace series type linear differential equation with coefficients containing negative second order power function and arrangement number into the linear differential equation of successive integral,the theory and method for the general solution of this kind of equation are determined.
通过把系数含有负二次幂函数与排列数的交错级数型线性微分方程化为可逐次积分的线性微分方程,找出了求这类方程通解的方法与理论,所得定理给出了严格的证明,并通过实例介绍了它的应用。
10)  successive iteration
逐次迭代
1.
In this paper, a novel method called successive iteration is proposed to solve nonlinear problem in which the initial approximation is corrected to approach exact solution and thus the nonlinear problem is transformed into a linear one.
本文提出了求解非线性问题的一种新方法———逐次迭代法 ,本方法先是给出一个初始近似解 ,然后将这个近似解进行校正迭代 ,使之接近于真实解 ,把一个非线性问题转化为一个线性问题来解决。
2.
We study the successive iteration of positive solution for a 2n th Lidstone boundary value problem where the nonlinear term depends on all even-order derivatives.
研究了2n阶Lidstone边值问题正解的逐次迭代,其中非线性项依赖于所有偶数阶导数。
补充资料:炮兵逐次集中射击


炮兵逐次集中射击
artillery concentration firing in sequence

  Paobing zhuei iizhong sheii炮兵逐次集中射击(artillery。。neentra-tion firing in sequenee)炮兵向己方步兵、装甲兵冲击的正面和翼侧的若干预定的集中射击地段,逐次延伸火力的射击。当敌方防御为支撑点配系时,通常使用逐次集中射击实施炮火支援。逐次集中射击的火力,应与己方步兵、装甲兵的.浅斗行动紧密配合。根据敌方防御配系,地形条件,合成军队的战术要求,己方步兵和装甲兵冲击的方向和速度,准备时限和火炮、弹药数量等条件,确定逐次集中射一击地段的数量和位置,通常选定在敌方支撑点上或其他可能组织抵抗的和反冲击的地区。在地段选定后,应将概略位于同一距离上的各地段划为同一射击地区,并赋予代名和编号。对各个射击地段的火力分配同集中射击。对各地区或各地段的射击持续时间和发射弹数通常都要事先概算。对各地区或各地段,通常进行一次急袭射击,开始每炮进行数发急促射,尔后按固定的发射间隔进行连的等速射,直至接到转移火力或停止射击的信号为止。向各地区或各地段转移火力,-般不宜间断,但若与下一地区或地段相距甚远时也可短暂间断火力,在适当时机再向下一地区或地段转移火力。 (夏锦华)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条