1) metal screen printing
金属丝网漏印刷法
2) screen printing
丝网印刷法
1.
According to the special structure of SMPDP, two different phosphor layer preparation methods including screen printing and spraying are studied in this paper.
针对SMPDP结构的特殊性,讨论了丝网印刷法和喷涂法制备荧光粉层的制作工艺,并对比其优劣。
2.
In this thesis, The microstructural and electrical characteristics of ZnO-based thick film varistors doped with a small quantity of Dy_2O_3 prepared on alumina substrates by screen printing have been investigated.
本文采用丝网印刷法,在氧化铝基片上制备了掺杂微量(0。
3.
The (La,Sr) (Co,Fe)O3-δ(LSCF)/YSZ and LSCF/GDC composite cathodes for solid oxide fuel cells (SOFC) were prepared by the impregnation method and screen printing method, respectively.
采用溶液注入法和丝网印刷法制备了(La,Sr)(Co,Fe)O3-δ(LSCF)/YSZ与LSCF/GDC复合电极,并通过扫描电镜和电化学阻抗谱研究了不同结构电极的微观形貌和电化学催化性能。
3) silk screening
丝网漏印法
4) silk screening
丝网[印刷电路]法
5) screen-printing
丝网印刷
1.
Effects of different materials for making pore in paste on TiO_2 films prepared by screen-printing technique;
丝网印刷胶体组成中不同造孔剂对TiO_2薄膜性能的影响
2.
Studies on the BaFe_(12)O_(19) ferrite permanent thick films prepared by screen-printing;
丝网印刷制备钡铁氧体永磁厚膜的研究
3.
To solve the problems of field emission capability and short lifetime of screen-printing carbon nanotube(CNT) thin film cathode,a novel post-treatment with high-temperature sintering and plasma bombarding is presented.
针对丝网印刷碳纳米管(CNTs)薄膜阴极场发射能力差和寿命短等问题,提出了一种能有效改善其场发射性能的高温烧结和等离子轰击后处理方法。
6) silk screen printing
丝网印刷
1.
The silk screen printing originating in China can be traced back to more than 2,000 years ago.
丝网印刷最早起源于中国,距现在已有二千多年的历史了。
2.
In the electronics industry, the silk screen printing is inseparable with the electronics product, thus becoming new realm of the electronics silk screen printing.
丝网印刷以其独特的自身特点,成为目前应用领域最广泛的印刷方法。
补充资料:丝网印刷软塑油墨
分子式:
CAS号:
性质:由合成树脂、颜料、溶剂和辅助料组成。合成树脂经溶剂溶解后与一定量的颜料、填料、助剂配成树脂液,经搅拌碾磨调配而成。产品为黏稠液状物,流动性好,有红、黄、绿、蓝、黑、白、金、银等多种颜色,附着力强,耐酸碱,耐磨性好,丝印后表面干燥比硬塑油墨快。适用于聚氯乙烯软塑制品及火焰处理后的聚乙烯、聚丙烯软塑制品印刷,亦可用于聚氯乙烯人造革制品及塑料玩具上。
CAS号:
性质:由合成树脂、颜料、溶剂和辅助料组成。合成树脂经溶剂溶解后与一定量的颜料、填料、助剂配成树脂液,经搅拌碾磨调配而成。产品为黏稠液状物,流动性好,有红、黄、绿、蓝、黑、白、金、银等多种颜色,附着力强,耐酸碱,耐磨性好,丝印后表面干燥比硬塑油墨快。适用于聚氯乙烯软塑制品及火焰处理后的聚乙烯、聚丙烯软塑制品印刷,亦可用于聚氯乙烯人造革制品及塑料玩具上。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条